JBL CS2165C Installation, Tweeter Angle, Mount SURFACE-MOUNT, Grille Mount surface-mounting cup

INSTALLATION

Figure 1. Mounting the woofer in a factory location without the grille.

I-MOUNT™FLUSH-MOUNT Figure 3A. Mounting the tweeter using the I-Mountflush-mounting kit.

3

1 2

TWEETER ANGLE

Figure 4. Aim the tweeter at the listening position by sliding the screw in the groove on the back of the tweeter cup and lock the tweeter in place using the small retaining screw. Rotate the entire assembly in the mounting surface and tighten the large hand nut.

3

ROTATE ENTIRE ASSEMBLY

TO AIM ANGLED TWEETER

TOWARD LISTENER.

1

	I-MOUNT SURFACE-MOUNT
Figure 2. Mounting the woofer with	Figure 3B. Mounting the tweeter using the
the grille.	I-Mount surface-mounting cup.

SLIDE SCREW UP OR

DOWN TO ADJUST

TWEETER ANGLE.

2

1

ATTACH BASE

WITH SCREWS, THEN:

2

3

BLACK (—)

RED (+)

TIGHTEN SCREW TO

LOCK ANGLE SETTINGS.

4

SECURELY TIGHTEN

THE LARGE HAND NUT.

Note: Check screw clearance before installing. Use glue if clearance is an issue.

Note: Not all possible mounting configurations are shown.

3