WALL-MOUNTING THE SATELLITES
The CS400SAT is designed to be mounted on the wall. There is a
Step 4. Unscrew round collar (C) from bracket (A).
NOTE: The customer is responsible for the correct selection
and use of mounting hardware (available through hardware stores) that will ensure the proper and safe
A
B
C
Fixed-Mount Wall Bracket
Step 1. Mark the positions on the wall where you would like to place the mounting screws.
Step 2. Attach the bracket to the wall using two screws (not included).
Step 3. Remove the rubber ring on the bottom of the satellite, and sit the satellite onto the back bracket.
Step 4. Attach
Adjustable Wall Bracket
Step 1. Remove cap over threaded insert on rear of speaker
Step 5. Screw the ball and shaft assembly (B) to the
Step 6. Attach speaker wire as shown on page 5.
Step 7. Drop round collar (C) over ball and shaft assembly (B) that is mounted to the speaker with the finished side of the collar facing the rear of the speaker.
Step 8. Carefully push the ball straight into the socket mounted on the wall, angle the speaker as desired and tighten the collar using the enclosed metal bar.
Metal bar
Step 2. Mark the positions on the wall where you would like to place the mounting screws.
Step 3. Place bracket against the wall and fasten four
Figure 3. Bracket on wall.
4