INSTALLATION

WARNING: Playing loud music in an automobile can hinder your ability to hear traffic and permanently damage your hearing. We recommend listening at low or moderate levels while driving your car. JBL accepts no liability for hearing loss, bodily injury or property damage resulting from the use or misuse of this product.

IMPORTANT: To get the best performance from your JBL CS Series amplifiers, we strongly recommend that installation be entrusted to a qualified professional. Although these instructions explain how to install CS amplifiers in a general sense, they do not show specific installation methods that may be required for your particular vehicle. If you do not have the necessary tools or experience, do not attempt the installation yourself. Instead, please ask your authorized JBL car audio dealer about professional installation.

INSTALLATION WARNINGS AND TIPS

Always wear protective eyewear when using tools.

Turn off the audio system and other electrical devices before you start. Disconnect the (–) negative lead from your vehicle’s battery.

Check clearances on both sides of a planned mounting surface before drilling any holes or installing any screws. Remember that the screws can extend behind the surface.

At the installation sites, locate and make a note of all fuel lines, hydraulic brake lines, vacuum lines and electrical wiring. Use extreme caution when cut- ting or drilling in and around these areas.

Before drilling or cutting holes, use a utility knife to remove unwanted fabric or vinyl to keep material from snagging in a drill bit.

When routing cables, keep input-signal cables away from power cables and speaker wires.

When making connections, make certain they are secure and properly insulated.

If the amplifier’s fuse must be replaced, use only the same type and rating as that of the original. Do not substitute another kind.

CHOOSING A LOCATION AND MOUNTING THE AMPLIFIER

Choose a mounting location in the trunk or cargo area where the amplifier will not be damaged by shifting cargo. Amplifier cooling is essential for proper amplifier operation. If the amplifier is to be installed in an enclosed space, make sure there is sufficient air circulation for the amplifier to cool itself.

When mounting the amplifier under a seat, ensure that it is clear of all moving seat parts and does not affect the seat adjustments. Mount the amplifier so it is not damaged by the feet of backseat passengers. Make sure that the amplifier is mounted securely using nuts and bolts or the supplied mounting screws.

Mount the amplifier so that it remains dry – never mount an amplifier outside the vehicle or in the engine compartment.

Figure 1. Terminal connection end plate.

POWER CONNECTIONS The CS amplifiers require a reliable connection to the vehicle’s electrical system in order to perform optimally. See Figure 1 for terminal connection locations. Please adhere to the following instructions carefully:

Ground Connection

Connect the amplifier’s Ground (GND) terminal to a solid point on the vehicle’s metal chassis, as close to the amplifier as possible. Refer to the chart below to determine minimum wire-gauge size. Sand away any paint from this location; use a star- type-lock washer to secure the connection.

Power Connection

Connect a wire (see chart at right for appropriate gauge) directly to the vehicle’s positive battery terminal, and install an appropriate fuse holder within 18" of the battery terminal. Do not install the fuse at this time. Route the wire to the amplifier’s location, and connect it to the amplifier’s Positive (+12V) terminal. Be sure to use appropriate grommets whenever routing wires through the firewall or other sheet metal. Failure to adequately protect the positive wire from potential damage may result in a vehicle fire. When you are done routing and connecting this wire, you may install a 40A fuse at the battery.

Remote Connection

Connect the amplifier’s Remote (REM) terminal to the source unit’s Remote Turn- On lead using a minimum of 18-gauge wire.

NOTE: If your source unit does not have a remote turn-on connection, connect the amplifier’s (REM) terminal to the vehicle’s accessory circuit.

Speaker Connections

Refer to the application guides on the pages that follow. Speaker connections should be made using a minimum of 16-gauge wire.

Wire Gauge Chart

 

Amplifier

Maximum

Minimum

Model

Current Draw

Wire Gauge

CS50.4

40A

#8 AWG

CS200.1

42A

#8 AWG

These recommendations assume 10' – 12' wire runs. If your installation differs mark- edly, you will need to adjust the wire gauge accordingly.

2

Page 2
Image 2
JBL CS Series owner manual Installation Warnings and Tips, Choosing a Location and Mounting the Amplifier

CS Series specifications

The JBL CS Series is a notable line of car audio speakers renowned for its dependable performance and high-quality sound. Designed to enhance the in-car audio experience, the CS Series combines advanced technology with user-friendly features, making it a popular choice among car audio enthusiasts and casual listeners alike.

One of the standout features of the JBL CS Series is its ability to deliver clear and detailed sound across a wide frequency range. This is achieved through the integration of high-quality materials and innovative design techniques. The speakers often include a polycarbonate woofer cone, which contributes to a balanced bass response without compromising clarity in the mid and high frequencies. This ensures that whether you're listening to booming bass tracks or delicate vocals, the sound remains accurate and pleasant.

Furthermore, the CS Series incorporates JBL's proprietary technology known as "Advanced Waveguide" that significantly enhances the sound dispersion. This technology helps to create a fuller audio experience, filling the entire vehicle with sound, no matter where the listener is seated. This feature is particularly advantageous in larger vehicles where audio can often be uneven.

The CS Series also boasts a rugged construction designed to withstand the varied conditions found in automotive environments. The durable materials used in the speaker cones and surrounds aid in minimizing distortion and enhancing longevity. This robustness ensures that the speakers maintain performance over time, even with prolonged use.

Installation of JBL CS speakers is made straightforward, as they typically come in standard sizes that fit most vehicle models, allowing for easy upgrades without the need for complicated modifications. The speakers are also compatible with a wide range of head units, making them versatile in their application.

Adding to their appeal, the CS Series is designed with style in mind. The sleek aesthetics of the speakers can accentuate the interiors of various vehicles, offering an upgrade not just in sound but in appearance as well.

In summary, the JBL CS Series is characterized by its quality sound production, advanced technologies for better dispersion, durability, ease of installation, and stylish design. These elements come together to deliver a superior auditory experience for anyone looking to elevate their car audio system. Whether you're a music lover or simply looking to enhance your daily commute, the JBL CS Series presents an excellent choice in car audio enhancement.