JBL manual EON515XT Specifications, Block Diagram

EON515XT Specifications

System Specification

System Type:	Self powered 15", two-way, bass-reflex
Maximum SPL Output:	132 dB
Frequency Range (-10 dB):	39 Hz -20 kHz
Frequency Response (±3 dB):	42 Hz - 18 kHz
Input Connectors:	2 x 1/4" TRS phone jacks balanced/unbalanced 1 x XLR / 1/4" TRS combo jack with XLR loop through
Input Impedance:	14k ohms
Signal Indicators:	Limit: Red LED indicates limiter active condition
	Signal: Green LED indicates signal present
	Mic: Indicates the MIC/LINE switch is in the “MIC” position
EQ:	Individual Bass and Treble controls, center detent, 6 dB cut and boost
	Bass +/- 6 dB (200 Hz turnover frequency)
	Treble +/- 6 dB (4 kHz turnover frequency)
Mic Input Gain:	-Infinity to +40 dBu
Line Input Gain:	-Infinity to +4 dBu (+18 dBu maximum input level)
Limiter:	Yes

Amplification

Amplifier Design:	Crown® Class-D
System Power Rating:	625 Watts (525 + 100)

Speaker Specification

LF Driver:	1 x JBL 265F-1 380 mm (15") Differential Drive® integrated woofer with dual 2" voice coils
HF Driver:	1 x JBL 2414H 37.5 mm (1.5") annular polymer diaphragm, neodymium compression driver
Coverage Pattern:	100º H x 60º V nominal
Crossover Frequency:	1.7 kHz

Enclosure	Polypropylene, multi-purpose main & monitor
Material:
Suspension / Mounting:	36 mm pole socket with stabilizing screw, 5 x M10 suspension points
Handles:	One left/right side, one on top, with rubber grip
Finish:	Black Granite
Grille:	Powder coated perforated steel with acoustically transparent cloth backing.
Dimensions (H x W x D):	673 mm x 406 mm x 368 mm (26.5" x 16" x 14.5")
Gross Weight:	24.2 kg (53.5 lb)

Block Diagram
	LOOP
	MIX
OUT
INPUT 3	TREBLE
LEVEL 3	SUM
LINE
MIC
MIC	BASS
INPUT 2	SIGNAL
LEVEL 2
INPUT 1
LEVEL 1

HPF

LPF

EQ

EQ

	HF
COMPRESSOR	LF

OVERLOAD LED

11