EXISTING CONSTRUCTION
HTI6, HTI8, HTI55
Level
Template
| ≥1/2" |
≥1/2" | ≥1/2" |
Remove the grille from the speaker frame by pulling on the paper tab. If the tab is missing, to avoid scratching the grille or baffle you may unfold a paper clip, insert the straight end through one of the holes in the grille, and gently pull up.
Determine the correct speaker location.
Note: Remove the inner tem- plate, which is the paint shield, at the perforation. Use the outer template when cutting the dry- wall. Although the HTI55 may be oriented either horizontally or vertically, the installation procedure is the same.
Note: Always allow at least
Cut the drywall.
Screw down each of the four (six for HTI55) Phillips head screws. The locking tabs will swivel into place and secure the unit to the rear surface of the drywall.
Connect the speaker wires to the speaker.
The HTI speakers feature unique swivel mounts for the tweeters that enable you to aim the very directional high frequencies toward the listening position, at
Place the frame assembly in the wall.
Replace the metal grille. For the HTI55 only, attach the JBL logo to the grille to correspond to vertical or horizontal installation.
5