JBL L8400P specifications Specifications, Owner’S Guide, Studio L Series

SPECIFICATIONS

Model	L8400P
Description	12" (300mm), 600-Watt, high-performance compact powered subwoofer
Amplifier
Power (RMS)	600 Watts
Peak Dynamic	1200 Watts
Power†
Frequency
Response (–3dB)	22Hz – Low-pass crossover frequency
Low-Pass
Crossover
Frequencies	50Hz – 150Hz, Continuously adjustable
Low-Frequency
Transducer	12" (300mm) PolyPlas™ cone with rubber surround and cast-aluminum chassis;
	HeatScape™ motor structure; Symmetrical Field Geometry™ (SFG™); oversized
	fiberglass voice coil; magnetic shorting ring
Baffle	Low diffraction, IsoPower™
Enclosure	Sealed
Inputs	Gold-plated 5-way binding-post speaker-level; left and right line-level,
	switchable to LFE
Outputs	Gold-plated 5-way binding-post speaker-level; 150Hz high-pass when using
	speaker-level connection
Dimensions
(H x W x D)	16-1/2" (15-1/2" without feet) x 15-1/2" x 15-1/2"
	(419mm [394mm without feet] x 394mm x 394mm)
Weight	58 lb (26.4kg)

†The Peak Dynamic Power is measured by recording the highest peak-to-center voltage produced by the power amplifier with its limiters disabled, across the output of a resistive load equal to minimum impedance of the transducer, using a 50Hz sine wave burst, 3 cycles on, 17 cycles off.

PRO SOUND COMES HOME™

JBL Consumer Products, 250 Crossways Park Drive, Woodbury, NY 11797 USA 8500 Balboa Boulevard, Northridge, CA 91329 USA

2, route de Tours, 72500 Chateau du Loir, France www.jbl.com

© 2005 Harman International Industries, Incorporated. All rights reserved.

JBL and Harman International are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries.

Part No. 354038-001

Dolby and Pro Logic are registered trademarks of Dolby Laboratories. DTS is a registered trademark of DTS, Inc.

All features and specifications are subject to change without notice.

STUDIO™ L SERIES

L8400P

OWNER’S GUIDE

®