TROUBLESHOOTINGSPECIFICATIONS
SYMPTOM | LIKELY CAUSE | SOLUTION |
Power LED is not lit. | Fuse is blown. | Fuse should be replaced. |
| Head unit is not | Check remote voltage, and power, |
| functioning properly. | ground or remote connections. The |
|
| MPS1000 is designed to shut off if |
|
| the battery voltage falls below 10V. |
|
| This is to ensure that your battery |
|
| isn’t completely drained. Charge |
|
| the boat’s battery. |
Power LED is lit | Inputs are not connected. | Check connections. |
but there is no bass. | Adjust | |
| ||
| is not set properly. | feed audio signals to the MPS1000. |
MPS1000 sounds | Gain control is set too high. Readjust Gain control (see “Tuning | |
muddy or distorted. |
| the MPS1000” on the previous page). |
| Bass Boost is set too high. | Readjust Bass Boost control |
|
| (see “Tuning the MPS1000” on the |
|
| previous page). |
MPS1000
10" (250mm) Marine Powered Subwoofer
•Amplifier Power: 250W RMS
•Frequency Response: 40Hz – 100Hz
•
•Fuse: 30A
•Max. Current Draw: 14A
•Idle Current Draw: <1.03A
•Input Sensitivity:
•
•
•Crossover Frequency: 50Hz to 100Hz
•Crossover Slope: 12dB per octave
•Bass Boost: 0dB to +7dB @ 50Hz
•Mounting Depth:
•Cutout Diameter:
•Overall Diameter:
•
13"
331mm
A valid serial number is required for warranty coverage.
Features, specifications and appearance are subject to change without notice.
234mm
258mm
Harman Consumer Group, Inc.
250 Crossways Park Drive
Woodbury, NY 11797 USA
www.jbl.com
© 2007 Harman International Industries, Incorporated. All rights reserved.
JBL is a trademark of Harman International Industries, Incorporated, registered in the United States and/or other countries.
Part No. MPS1000OM5/07
Declaration of Conformity
We, Harman Consumer Group, Inc. 2, route de Tours
72500 Château du Loir France
declare in own responsibility that the product described in this manual is in compliance with technical standards:
EN 55013:2001
EN 55020:2002
Klaus Lebherz
Harman Consumer Group, Inc.
Château du Loir, France 5/07