C O N N E C T I O N S A N D S E T T I N G S

 

There are four possible

center is always connected

 

configurations for connecting

directly to the speaker-level

 

the PT800 tower and PS1400

outputs of the receiver or

 

subwoofer modules. The PC600

amplifier.

Stacked, With Speaker-Level Input to PS1400 and Internal High-Pass Signal Output to PT800

Use this installation method

1. Configure the receiver/

7. Remove the JBL logo plate

with the PT800 and PS1400

processor for “Large”

from the mounting plate on top

stacked.

speakers for the left and

of the PS1400 by gently prying

By using the PS1400’s internal

right channels.

it upwards. This will expose

 

the binding post output

crossover to process the full

2. Configure the receiver/

terminals that will provide the

range output of your receiver

processor for “Subwoofer Off”.

signal for the PT800 module.

or amplifier, the Performance

3. Configure the receiver/

It is easiest to connect the

speakers can behave as a

processor for “Small” for the

gold jumper bars between the

single full-range system and

center and rear channels.

terminals on the top of the

produce the highest quality of

4. Check the owner’s guide for

PS1400 and the terminals on

sound reproduction that makes

your receiver or amplifier to

the rear of the PT800 by

the best use of each transducer

make sure that the main

completely unscrewing the

component of each module.

speaker terminals will output

binding post collars first. Insert

Do not use the PS1400’s

a full-range amplified signal.

the closed loop at one end of

internal crossover and

Connect your receiver or

the jumper bar over the PS1400

speaker-level outputs unless

amplifier’s left and right

output terminal, and insert the

the PS1400 and PT800 are

speaker terminals to the

open end of the bar around the

stacked. If the PT800 is placed

binding posts marked

PT800’s input. Screw the

separately – on the wall, on

“System Input” ¦ on your

collars back onto their

a shelf or on a stand – you

corresponding left and right

respective posts.

must use your receiver or

PS1400 subwoofer modules.

 

processor’s crossover, which

5. Set the PS1400’s crossover

 

should be set to 80Hz. The

 

switch ª to the “Normal”

 

reason for this is that the

 

position. This will cause the

 

PS1400’s internal crossover is

 

PS1400 to provide an electronic

 

set at 130Hz, and was custom-

 

130Hz crossover for the

 

designed around the precise

 

subwoofer that matches the

 

location of the PT800 module

 

passive 130Hz crossover point

 

on top of the subwoofer.

 

at the output to the PT800 tower.

 

This installation method can be

 

6. Set the Polarity (phase)

 

used for non-digital surround-

 

switch ¢ to Normal, since all

 

sound formats, such as Dolby*

 

amplifier channels will be in

 

Pro Logic*, where the receiver

 

phase, and in the stacked

 

or processor does not have a

 

configuration, sound-wave

 

subwoofer output or a volume-

 

cancellation will not be an

 

controlled preamp (line-level)

 

issue.

 

output.

 

 

 

10

Page 10 Page 12
Page 11
Image 11
JBL specifications Do not use the PS1400’s, Internal crossover, PS1400 and PT800 are, Separately on the wall, on
Page 10 Page 12

PS1400 specifications

The JBL PS1400 is a powerful and versatile speaker that caters to a wide range of audio needs, making it an excellent choice for both professional and casual use. Known for its robust build and exceptional sound quality, the PS1400 stands out in the competitive audio landscape.

One of the primary features of the JBL PS1400 is its impressive power handling capability. With a rated power output of 1400 watts, this speaker can easily fill large venues with clear, vibrant sound. The speaker is designed to handle high levels of audio without distortion, ensuring that music and vocal performances sound crisp and dynamic, even at high volumes.

The PS1400 utilizes JBL's advanced transducer technology, which enhances its sound reproduction. The speaker features a high-frequency compression driver that delivers pristine treble frequencies, providing clarity and detail that can be heard even in challenging acoustic environments. Additionally, the 14-inch woofer is engineered to produce rich bass tones, offering a well-balanced audio experience across the frequency spectrum. This dual driver setup allows for an impressive sound stage, making it suitable for live events, DJ performances, and studio monitoring.

Another notable aspect of the JBL PS1400 is its durable design. Built with high-quality materials, the speaker is engineered to withstand the rigors of both indoor and outdoor use. Its rugged enclosure protects against damage from physical impact and environmental conditions, while the integrated handles facilitate easy transport. Coupled with its professional-grade connectors, the PS1400 is designed for reliability in various settings.

In terms of connectivity, the JBL PS1400 features versatile input options, including XLR and TRS connectors, allowing seamless integration with different sound systems and equipment. This flexibility makes it ideal for use in diverse situations, from concerts to corporate events.

Overall, the JBL PS1400 combines power, quality, and durability, making it an exceptional choice for anyone looking to enhance their audio experience. With its advanced technologies and robust features, the PS1400 delivers a sound quality that is hard to match, ensuring that your music sounds its best, whether on stage or in the studio.
Top Page Image Contents