4.0 INTERCONNECTIONS IN SYNTHESIS SYSTEMS
General Information
A Synthesis Two or Three installation incorporates a total of two power amplifiers; one S7150 and one S800. All seven channels on the S7150 are to be used for driving the left, center, right, both side, and both rear speakers.
Use the simplified connection diagrams on the following pages to help you understand how to connect the S7150 amplifier to a JBL Synthesis System. These diagrams are intended to show the signal flow through the system. For more detail in making these connections, please refer to the JBL Synthesis Certified Dealer Installation Manual.
Connect DIN and audio cables between system components, as shown on the following pages. Make sure that on all power amplifiers the power switches are in the depressed (ON) position and that the Auto On/ Manual On switches are in the Auto On position. Operated in this mode, all of the components will turn on with one touch of the power button on the surround processor's remote control.
CONNECTING4.YOUR0 SYNTHESIS SYSTEM
13
