![](/images/new-backgrounds/1036754/3675417x1.webp)
OPERATION
Move the Master Power switch (marked “Power” ¡) to the “•” (On) position to use the subwoofer. The SCS136 subwoofer will automatically turn on or go into standby (sleep) mode when left in the auto mode (“Auto/On” switch
™in the “Auto” position).
When your receiver or ampli- fier is off, or is not sending program material to the sub- woofer, the subwoofer will be in standby mode (LED will be red). When the subwoofer senses an audio signal, it will
automatically turn on (LED will be green). If the subwoofer does not sense a signal after approximately twenty minutes, it will automatically go back into standby mode.
When the “Auto/On” switch
™ is switched to the “On” |
position, the subwoofer will |
OUT
IN
|
|
| HIGH LEVEL |
|
|
|
| LINE LEVEL IN | ||||
+ | L | – |
|
| – |
| R | + |
| |||
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
LFE
IMPORTANT: CONNECT STRIPED WIRE TO RED ( + ) SPEAKERTERMINAL.
L
AUTO |
| ON |
R
GREEN: ON
RED: STANDBY
™
SUBWOOFER
LEVEL
£
MIN MAX
remain on, whether or not |
program material is playing. |
If you will be away from home |
for an extended period of time, |
or if the subwoofer will not |
be used, switch the Master |
Power switch ¡ to the Off |
position. |
SUB 136
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
POWER
¡
AC 120V~60Hz
VOLUME
Subwoofer
Level
Volume may be adjusted using the Subwoofer Level control £ as shown.
MIN MAX
Subwoofer
Level
MIN MAX
9