JBL SDEC-4000 Input/Output Assignments, Selecting Bi-Amped Configuration, Method One, Method Two

INPUT/OUTPUT ASSIGNMENTS

SELECTING BI-AMPED CONFIGURATION

There Are Two Ways to Select Bi-Amped LCR Operation.

Please Note: Only Method One can be done on the control ports (without a computer). Method Two requires a computer running the appropriate configuration software. Please contact JBL Synthesis Technical Support for more information.

SELECTING FULL-RANGE CONFIGURATION

There Are Two Ways to Select Full-Range LCR Operation.

Please Note: Only Method One can be done on the control ports (without a computer). Method Two requires a computer running the appropriate configuration software. Please contact JBL Synthesis Technical Support for more information.

METHOD ONE:

With the unit powered up and running, connect Control Input 2 to “C” for bi-amped.

METHOD TWO:

While online and in operate mode from within London Architect™, select the “Main” page and then click on the bi-amped button.

METHOD ONE:

With the unit powered up and running, connect Control Input 1 to “C” (common) on the back of the unit for full-range.

METHOD TWO:

While online and in operate mode from within London Architect, select the “Main” page and then click on the full-range button.

NOTE: The full-range configuration is the default and will not require selection during normal use.

11