JBL SRX700 manual Specifications

SPECIFICATIONS

4

SRX712M - 12¨, two-way, bass-reflex, stage-monitor / utility

Frequency Range (-10 dB):	70 Hz - 20 kHz
Frequency Response (±3 dB):	83 Hz - 18 kHz
Coverage Pattern:	90º x 50º nominal
Crossover Modes:	Bi-amp / passive, externally switchable
Crossover Frequency:	1.2 kHz
Power Rating (Continuous¹/ Program/ Peak):	Passive:	800 W / 1600 W / 3200 W
	Bi-amp LF: 800 W / 1000 W / 3200 W
	Bi-amp HF: 75 W / 150 W / 300 W
Maximum SPL²:	131 dB SPL peak
System Sensitivity (1w @ 1m):	96 dB SPL (passive mode)
LF Driver:	1 x JBL 2262H 305 mm (12 in) Differential Drive® woofer with neodymium-magnet and dual voice-coils
HF Driver:	1 x JBL 2431H 75 mm (3 in) voice-coil, neodymium-magnet compression driver
Nominal Impedance:	Passive:	8 ohm
	Bi-amp LF: 8 ohms
	Bi-amp HF: 8 ohms
Active Tunings:	dbx DriveRack, all models. Settings available at www.jblpro.com
Enclosure:	Symmetrical stage monitor, 15 mm, 11-ply birch plywood.
Suspension / Mounting:	Dual angle, 35 mm pole socket 2 x M10 fittings for optional SRX712M-YK yoke
Transport:	Integrated handle / input cup
Finish:	Black DuraFlex™ finish
Grille:	Powder coated, black, 16-gauge perforated steel with acoustically transparent charcoal foam backing
Input Connectors:	Neutrik ® Speakon® NL-4 (x2), one on each end
Dimensions (H x W x D):	349 mm x 546 mm x 260 mm (13.75 in x 21.5 in x 10.25 in)
Net Weight:	15 kg (33 lb)
Optional Accessories:	SRX712M-CVR: Pull-over padded cover
	SRX712M-YK: Suspension, mounting yoke
	SS2-BK: tripod speaker stand
	SS3-BK: satellite speaker pole, 35 mm diamter, 41 in (1041 mm)

SRX715 - 15¨, two-way, bass-reflex (suspendable version, SRX715F)

Frequency Range (-10 dB):		43 Hz - 20 kHz
Frequency Response (±3 dB):		53 Hz - 20 kHz
Coverage Pattern:		75º x 50º nominal
Crossover Modes:		Bi-amp / passive, externally switchable
Crossover Frequency:		1.2 kHz
Power Rating (Continuous¹/Program/Peak):		Passive:	800 W / 1600 W / 3200 W
		Bi-amp LF: 800 W / 1600 W / 3200 W
		Bi-amp HF: 75 W / 150 W / 300 W
Maximum SPL²:		131 dB SPL peak
System Sensitivity (1w @ 1m):		96 dB SPL (passive mode)
LF Driver:		1 x JBL 2265H 380 mm (15 in) Differential Drive® woofer with neodymium-magnet and dual voice-coils
HF Driver:		1 x JBL 2431H 75 mm (3 in) voice-coil, neodymium-magnet compression driver
Nominal Impedance:		Passive:	8 ohms
		Bi-amp LF: 8 ohms
		Bi-amp HF: 8 ohms
Active Tunings:		dbx DriveRack, all models. Settings available at www.jblpro.com
Enclosure:		Trapezoidal, 15 mm, 11-ply birch plywood
Suspension / Mounting:		Dual-angle (0° or -10°) 35 mm pole socket
		5 x suspension points, M10 or optional fly track kit (F version only)
Transport:		2 x steel handles
Finish:		Black DuraFlex™ finish
Grille:		Powder coated, black, 16-gauge perforated steel with acoustically transparent charcoal foam backing
Input Connectors:		Neutrik® Speakon® NL-4 (x2)
Dimensions (H x W x D):		711 mm x 439 mm x 406 mm (28 in x 17.3 in x 16 in)
Net Weight:		22 kg (48 lb)
Optional Accessories:		SRX715-CVR: Pull-over padded cover
		SRX-FF3: Flying hardware kit (for use with F versions only)
		229-00009-01: Suspension kit, includes 3 x 10 mm forged eyebolts & washers (for use with F versions only)
		SS2-BK: tripod speaker stand
		SS3-BK: satellite speaker pole, 35 mm diamter, 41 in (1041 mm)
¹	IEC filtered noise with 6 dB crest factor.
²	Calculated based on peak power rating and sensitivity, 1 m.