JBL VT4880 Vertec Systems Suspension Hardware & Assembly Notes, Arrays of similar Vertec Model

VERTEC SYSTEMS

SUSPENSION HARDWARE & ASSEMBLY NOTES

Arrays of similar VERTEC Model

•Each VERTEC model uses the matching model of Array Frame (VT488X-AF) or Short Frame (VT488X-SF) to create clusters of the same model.

•These same frames can also be used to ground stack the various systems.

Arrays of Combined VERTEC Models

•Clusters of combined models (i.e. VT4887s attached under a VT4889) use ADAPTER FRAMES to interconnect the various models.

•These frames are the:

VT4800-DA to adapt VT4887 under VT4889 or VT4880.

VT4800-CA to adapt VT4887 under VT4888.

VT4800-UA to adapt any model to any model.

Ground stacking capabilities

•All VERTEC models can be ground stacked using the matching model of AF or SF frames.

•Up to 6 VERTEC cabinets can be safely stacked using the appropriate VERTEC AF frame and up to 4 cabinets when using the SF Frame.

General rigging recommendations

•Only qualified personnel should perform suspension of audio systems!

•Users should inspect every component to be rigged every time the system is used.

•Users should verify that all Quick Release Pins in the VERTEC cabinets and in the suspension frames are properly locked when rigging the system.

Page 14