System Configurations
There are many different possible configurations of systems within the JBL SR-X Series. This section shows a selection of key system configurations that will provide a basis for setting up any system, it includes: DSC controllers, amplifiers and wiring connections. It is very important that you are familiar with the previous sections of this User’s Guide and also the DSC260 system controller. Settings are available for the DSC260 for bi-amplified, and bi-amplified plus subwoofer, operation of the SR-X systems. Please note that when using the LF reinforcement systems, a suitable adjustment may be required in the DSC260 for accurate operation in the system. This is a straight forward procedure which is clearly outlined in the DSC260 User’s Guide.
Note: Each line in the diagrams below represents a pair of wires. (E.g. both +1 and -1 connecting wire.)
Full-range 2-Way
Full Range
± 1
Amplifier
Bi-Amplified 2-Way
See “Crossovers and Controllers” for important information.
| | | DSC260 | Output 6 | | |
| | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | Amplifier |
Input B | | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | Output 4 | Amplifier |
| | | | | | | | | | | |
