DRAWER FRONT KIT FOR
JENN-AIR ELECTRIC WARMING DRAWER
PARTS SUPPLIED:
Front/handle assembly | 7 mounting screws |
Front identification label
The warming drawer should be installed according to the installation instructions packed with the product.
STEP 1
•Open the drawer fully.
•Turn the drawer off.
STEP 2
•Install the assembled panel to the warming drawer.
–Place the front assembly on the front of the warming drawer. The metal panel of the custom front assembly hooks over the top of the front panel on the warming drawer. The bottom flange of the metal panel of custom front assembly fits on the outside of the bottom flange on the warmer drawer frame.
–Fasten the drawer front assembly using the 7 screws provided. (4 at top back of drawer, 3 on door bottom.)
–Apply the front identification label next to the rating plate label at the front center of the warmer drawer cavity.
ENSEMBLE DE PANNEAU DE MONTAGE POUR LE TIROIR
PIÈCES FOURNIES : |
|
Ensemble panneau | Étiquette d’identification |
de façade/poignée | (avant) |
7 vis de montage |
|
On doit installer le tiroir
ÉTAPE 1
•Ouvrir complètement le tiroir.
•Interrompre l’alimentation du chauffe-plats.
ÉTAPE 2
•Installer le panneau assemblé sur le tiroir chauffe- plats.
–Place le panneau de façade assemblé à l’avant du tiroir
–Fixer le panneau de façade avec les 7 vis fournies. (4 au sommet/arrière de la porte, 3 en bas de la porte.)
–Apposer l’étiquette d’identification à côté de la plaque signalétique, au centre/à l’avant de la cavité du tiroir
Form No. A/03/03 Part No. | © 2003 Maytag Appliances Sales Co. Litho U.S.A . |