
Activating and canceling the clock/day of week display:
1.Press Setup pad.
2.Select CLOCK.
3.Press the arrow to scroll until DISABLE is displayed.
4.Select DISABLE.
5.Select TIME.
6.Select OFF to turn the clock display off, or select ON to turn the clock display on.
7.Select OFF to turn the day of the week display off. Select ON to turn the weekday display on.
8.To exit the Setup mode, press Setup pad.
Entering the day of the week:
2.Press the displayed times on the Quickset pads repeatedly until the desired time is entered.
OR
3.Press the number pads to enter the new desired time.
4.Press Enter pad.
Canceling the Timer:
1. Press the TIMER 1 or TIMER 2 pad twice.
If both Timers are active:
If the desired Timer is already in the foreground, press once for edit mode and twice to cancel the Timer. If the desired Timer is not in the foreground, follow the steps below.
1.Press the desired TIMER pad once. The selected Timer will come to the foreground.
1. | Press Setup pad. | 2. Press the TIMER pad a second time to access the edit | ||
mode in order to make changes. | ||||
2. | Select CLOCK. |
| ||
|
| |||
| 3. Pressing the TIMER pad a third time will cancel the Timer. | |||
3. | Press the arrow to scroll until DAY is displayed. | |||
Changing the Timer beeps: | ||||
4. | Use Quickset arrow to scroll through the days. | |||
The signal beeps for TIMER 1 and TIMER 2 can be changed. | ||||
5. | Select day desired. | |||
The options available are two beeps every thirty seconds, two | ||||
6. | To exit the Setup mode, press Setup pad. | beeps every sixty seconds or one beep only. The default | ||
|
setting is one beep.
To set the clock for a 12 or 24 hour format:
The clock can be set to display time in either a 12 hour or 24 | 1. Press the Setup pad. | |||
2. Select the arrow to scroll until TONES | ||||
hour format. | ||||
| is displayed. | |||
1. | Press the Setup pad. |
| ||
3. | Select TONES. | |||
2. | Select CLOCK. | |||
4. Select TIMERS TONES. | ||||
3. | Use the arrow to scroll to the next screen. | |||
5. Select the desired timer beep format | ||||
4. | Select 12/24 HOUR. | |||
| or 1 BEEP). | |||
5. | Select 12 HR or 24 HR. | 6. | Press Setup pad to exit Setup mode. | |
6. | To exit Setup mode, press Setup pad. | Locking the Control and Oven Door | ||
|
|
Timers
Setting the Timers (Timer 1 or Timer 2):
1.Press TIMER 1 or TIMER 2 pad.
2.Press one of the displayed times using the Quickset pads, or press the number pads to enter the desired time.
Important: Each press of the displayed time choices adds additional time. For example, pressing “10 MIN” three times provides 30 minutes on the timer (0:30).
3.Press Enter pad.
Changing the amount of time entered once the
Timer starts:
1. Press the TIMER 1 or TIMER 2 pad once.
15