2 of 4 |
36" INDUCTION Cooktop
JIC4536X – 361⁄4" x 41⁄8" x 213⁄8"
OPENING/CLEARANCE DIMENSIONS
A |
D* |
|
| E |
B |
| B |
| F | G |
|
| |
|
| e |
|
| C |
FRONT VIEW
MODEL # | JIC4536X | |||
|
| in | cm | |
A | Width of combustible area above | 331⁄8 | 84.0 | |
cooking surface (min.) | ||||
|
|
| ||
B | Width from cooktop to fixed wall | 1 | 2.5 | |
or other combustible material (min.) | ||||
|
|
| ||
|
|
|
| |
C | Width to outer edge of outlet (min.) | 10 | 25.4 | |
|
|
|
| |
D* | Height to bottom of uncovered wood or | 30 | 76.2 | |
metal cabinet above cooking surface (min.) | ||||
E | Height to bottom of uncovered wood | 18 | 45.7 | |
or metal cabinet (min.) | ||||
|
|
| ||
| Required height of ventilation opening in |
|
| |
F | front cabinet under countertop for proper | 3⁄16 | 0.5 | |
| ventilation – full width of cooktop |
|
| |
|
|
|
| |
G | Height to top edge of outlet (min.) | 12 | 30.5 | |
|
|
|
| |
H | Depth of upper cabinet (recommended) | 13 | 33.0 | |
|
|
|
| |
I | Depth from cutout to wall (min.) | 1 | 2.5 | |
|
|
| ||
J | Width of cutout | 331⁄8 84.0 | ||
K | Depth of cutout | 191⁄4 | 49.0 | |
L | Depth from cutout to front of countertop | 2 | 5.1 | |
|
|
|
| |
e | Recommended electrical access location |
|
| |
|
|
|
| |
*Dimension can be reduced by 6" (15.2 cm) when bottom of wood or metal cabinet is covered by not less than 1⁄4" (0.6 cm) flame retardant millboard covered with not less than No. 28 MSG sheet metal, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.
If installing a hood or microwave hood combination above the cooktop, follow the hood or microwave hood combination instructions for dimensional clearances above the cooking surface.
Side
Cabinet
H
I
ELECTRICAL REQUIREMENTS
240 volt, 60 Hz, AC only,
LOCATION REQUIREMENTS
•To ensure cooktop base clearance, cabinet side walls need to be wider than the cutout.
•If cabinet has a drawer, allow a 51⁄8" (13.0 cm) minimum clearance between countertop and top of drawer.
COOKTOP OVER SINGLE WALL OVEN INSTALLATION
REQUIREMENTS
•For approved model number combinations, refer to the under counter label on the bottom of the cooktop burner box.
•To install a cooktop over a single wall oven, refer to page 3.
|
|
| J |
|
|
| I | |
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
K
L
Side VIEW | TOP VIEW – cutout |
|
Product dimension, cutout and installation specifications are provided for planning purposes only. Before installing | JRC120028A 07/2012 | |
any product, be sure to verify cutout dimensions and electrical/gas connections as actual product dimensions may vary. | ||
