Jenn-Air JRTF1960, JRTD229, JRT219, JRTF2160, JRT199, JRT2160 manual Ar M, TueE

Note: When dispensing ice cubes, it is importantthat you use only the ice supplied by thisicernaker. Icefrom anyothersourceoouldcauseanicejam. Ifthis happens,remove and discard all ice from the storage bin and any ice lodged in the ice chute.

	AUTOMATIC
	ICE MAKER
Your automaticice maker islocated near the	/	SENSOR
top of the freezer compartment behind the Ice		ARM
Access Panel. To gain access to the ice		p/ _

The ice maker has a wire sensor arm that is

connmakingmechanism,ectedto shut-offliftswitchtheIce. ThisAccessarmPanelstops._OFF the mechanism when the ice cube storage

binisfull, andrestartsit afterseveralice cubes

have been used. You can use the stop arm to stop all productionof ice at any time. All you need to do is raise the arm into the OFF position.

The ice maker should be turned off (arm up) when;

1. Ice storage bin is to be removed for extended period of time.

2. Refrigerator isnot to beused for a considerableamount of time, such as vacations. Also, turn off the water supply to the ice maker in this instance, if practical.

3. Water supply is to be shut-off for several hours.

th freezer compartment has cooledto freez-		_FILL				TueE
Water fillsthe emptycube mold (Fig. 1) when
ing temperature. Cold air is forced direCtly		_	i	IL_¢_'_		p'-
over mold.
When frozen, the cubes are rotated up and			1	,_-_1_,_.		ICE
out of the mold (Fig. 2). The sweeper arm
ejects them into the ice storage bin below.			Fig.			]..,_----ICE
						BIN
The sensor arm (Fig. 3) senses when the				2==J===_==_
bin is full and signals the ice maker to stop
ejecting more cubes,		d_"'_		=_"	_
However, the mold has been refilled and
cubes frozen so the new supply is ready
when needed. As soon as ice is removed
from the bin,the sensorarm signalsthatmore
is needed. The icemakerresumes operation
by eiecting ready-and-waiting
frozen cubes.	Fig.
	3

15