Jenn-Air JWD7030CDX manual

www.dexpress.com DIMENSION EXPRESS Fax on Demand (775) 833-3600

This Data Sheet Includes Information On

Jenn-Air

Cabinet Opening

•

Product Model Number (s):

•

Built-In Electric Warming Drawer:

(not to scale)

JWD7030CDX

•

Dimensions (Actual Size)

•

Cutout width:

28 1/2"

9 1/4"

Cutout height:

9 1/4"

Locate junction box

Cutout Depth:

23 1/2"

below opening bottom or

Distance from face of cabinet to

in adjacent cabinet.

outer edge of drawer handle: n/a

Overall unit width:

30"

28 1/2"

Overall unit height: 10 1/2"

Depth with handle: n/a

Depth without handle: 23 1/4"

Oven overlap distances when using

23 1/2"

cutout dimensions listed above:

Cabinet face

Top overlap: 5/8"

Bottom overlap: 5/8"

Right side overlap: 3/4"

Side view of

Left side overlap: 3/4"

•

Additional Information

•

opening

(not to scale)

• Electrical requirements : 3 wire, 120V, 50-60Hz. 20

amp grounded circuit. Locate electrical out let in

adjacent cabinetry within 42" of the right side of the

Wall receptacle

opening or within 16" of the left side ot the opening. DO

NOT install receptacle above the top of the opening.

• When installing below a cooktop, allow a 2" minimum

from bottom of cooktop burner box to top of warming

drawer handle clearance

n/a

drawer cutout.

•When installing below a oven, allow a 2" minimum between cutouts.

•The cutout bottom should be solid or have braces which adequately support the weight of the warming drawer, especially in the rear. Install a 2x2 or 2x4 anti tip block against rear wall 9" from bottom of opening to bottom of block.

See page 2 for additional information

Subject to change without notice. This system is designed to
be updated daily if necessary. Dimension Express is not
responsible for use of superseded, voided, or outdated data
sheets. Because of the difficulty or impracticability of deter-
mining actual damages, liability of Dimension Express shall
not exceed $50.00.
Copyright © Dimension Express, 2003.	462
• NEVER reuse Data Sheets. Data Sheets are subject to change without		• Call Dimension Express if you have any questions at (775) 833-3633 •
notice. Dimension Express is a FREE service bureau and is updated daily,		• Always refer to a current Code at a Glance or manufacturer directory •
it makes far more sense to spend the time necessary to request new Data		• Data Sheet codes change on the first of odd numbered months at 12:01am •
Sheets for each project, as opposed to the problems, time, costs, and risks		BN16 • A462B149 • 31646 • 031806 • 16257 • 73958
associated with reusing old Data Sheets.