Install Optional Backguard

36" (91.4 cm) and 48" (121.9 cm) models may require a backguard. See “Cabinet Dimensions” in the “Location Requirements” section for installation requirements. See the “Tools and Parts” section for information on ordering.

Remove island trim and attach backguard using 6 screws, insert 3 from the front and 3 from the back (9" [22.9 cm] backguard shown).

Make Gas Connection

WARNING

Explosion Hazard

Use a new CSA International approved gas supply line.

Install a shut-off valve.

Securely tighten all gas connections.

If connected to LP, have a qualified person make sure gas pressure does not exceed 14" (36 cm) water column.

Examples of a qualified person include:

licensed heating personnel,

authorized gas company personnel, and authorized service personnel.

Failure to do so can result in death, explosion, or fire.

To Assemble Pressure Regulator:

1.Using 2 or more people, stand the cooktop on its side or back.

2.Connect the flexible stainless steel connector to the pressure regulator using a ¹⁄₂" male pipe thread adapter.

A combination of pipe fittings must be used to connect the cooktop to the existing gas line. Shown following is a typical connection. Your connection may be different, according to the supply line type, size and location.

A. Gas pressure regulator

B. Regulator - Must be installed with arrow pointing up to cooktop bottom

C. Adapter - Must have ¹⁄₂" male pipe thread

D. CSA approved flexible stainless steel gas supply line

3.Install the pressure regulator with the arrow pointing up toward the bottom of the cooktop burner base and in a position where you can reach the regulator cap.

IMPORTANT: All connections must be wrench-tightened. Do not make connections to the gas regulator too tight. Making the connections too tight may crack the regulator and cause a gas leak. Do not allow the regulator to turn on the pipe when tightening fittings.

Use only pipe-joint compound made for use with Natural and LP gas. Do not use TEFLON® tape.

You will need to determine the fittings required depending on your installation.

4.Place cooktop into the countertop cutout.

NOTE: Check that the front edge of the cooktop is parallel to the front edge of the countertop. If repositioning is needed, lift entire cooktop up from cutout to avoid scratching the countertop.

Typical flexible connection

1.Apply pipe-joint compound made for use with LP gas to the smaller thread ends of the flexible connector adapters (see B and F in the following illustration).

2.Attach one adapter to the gas pressure regulator and the other adapter to the gas shutoff valve. Tighten both adapters.

3.Use a ¹⁵⁄₁₆" combination wrench and channel lock pliers to attach the flexible connector to the adapters. Check that connector is not kinked.

	H
D
	E F	G
A. Gas pressure regulator	E. Adapter
B. Use pipe-joint compound.	F. Use pipe-joint compound.
C. Adapter - Must have ½"	G. ½" or ¾" gas pipe
male pipe thread	H. Manual gas shutoff valve
D. Flexible connector

W10394706A specifications

The Jenn-Air W10394706A is a modern, high-performance appliance designed to enhance the cooking experience in contemporary kitchens. Renowned for its precision, innovation, and sleek aesthetics, this offering from Jenn-Air is a favorite among culinary enthusiasts and home chefs alike.

One of the standout features of the W10394706A is its advanced cooking technologies. It incorporates innovative induction cooking, which provides rapid heating times and precise temperature control. This technology allows users to not only cook more efficiently but also safely, as the cooktop remains cool to the touch, minimizing the risk of burns. The induction system also offers an impressive level of responsiveness, allowing for quick adjustments while cooking, which is crucial for achieving perfect results.

In terms of design, the Jenn-Air W10394706A boasts a sophisticated and modern aesthetic, fitting seamlessly into any upscale kitchen environment. Its sleek surface is easy to clean and maintain, with a minimalistic look that emphasizes functionality without compromising style. The unit is engineered with high-quality materials, ensuring durability, longevity, and an enduring visual appeal.

Another notable feature of the W10394706A is its advanced cooking modes and smart technologies. Equipped with smart connectivity, users can control and monitor their cooking from a smartphone or tablet, providing a level of convenience that is invaluable in today’s fast-paced lifestyle. Additionally, it offers a variety of pre-set cooking modes, enabling effortless culinary creativity and consistency in food preparation.

Safety is paramount with the W10394706A, which integrates features such as automatic shut-off and child lock functionalities. These features ensure peace of mind in any household, promoting safe cooking practices and preventing accidents.

Moreover, the W10394706A emphasizes energy efficiency, utilizing technologies that help reduce energy consumption without sacrificing performance. This focus not only benefits the environment but also results in savings on utility bills, making it an economically conscious choice for households.

Overall, the Jenn-Air W10394706A stands out as an exceptional kitchen appliance that combines cutting-edge technology, elegant design, and practical features. It caters to the needs of discerning cooks, offering versatility and efficiency while enhancing the joy of cooking and entertaining in the modern home.

Jenn-Air W10394706A Install Optional Backguard, Make Gas Connection, Typical flexible connection

Models: W10394706A