12
Flexible Tines
The row of tines on the left-hand and
right-hand sides of the top rack can
be adjusted to make room for a
variety of dishes.
To adjust the fold-down tines:
1. Grasp the tip of the tine that is in
the tine holder.
2. Gently push the tine out of the
holder.
3. Lay the tines down, toward the
center of the rack.
NOTE: The bottom rack may also have 1 or 2 rows of flexible tines
located in the back of the rack. Follow the same instructions to
adjust.
Light Item Clips
The light item clips hold lightweight plastic items
such as cups, lids, or bowls in place during
washing.
To move a clip:
1. Pull the clip up and off the tine.
2. Reposition the clip on another tine.
Premium Adjustable 2-Position Top Rack
After removing the
culinary tool rack, you
can raise or lower the
top rack to fit tall items
in either the top or
bottom rack.
Adjusters are located
on each side of the
top rack. Each
adjuster has 2 preset
positions.
To raise the rack,
press both rack adjusters and lift the rack until it is in the Up
position and level.
To lower the rack, press both rack adjusters and slide the rack to its
Down position and level.
Manual Adjustable 2-Position Top Rack
You can raise or
lower the top
rack to fit tall
items in either the
top or bottom
rack. Adjusters
are located on
each side of the
top rack. Raise
the top rack to
accommodate
items up to 9"
(22cm) i n the top rack and 13" (33 cm) in the bottom rack, or lower
the top rack to accommodate items up to 11" (28 cm) in both the
top and bottom racks.
IMPORTANT: Remove dishes prior to removing the top rack from
the dishwasher.
To raise, remove rack and slide lower wheels into the rails as
directed in “Removable Top Rack” section.
To lower, remove rack and slide upper wheels into the rails as
directed in “Removable Top Rack” section.
Removable Top Rack (for Roller Glide Rails)
The removable top rack allows you to wash larger items such as
pots, roasters, and cookie sheets in the bottom rack.
IMPORTANT: Remove dishes prior to removing the top rack from
dishwasher.
To remove the rack
To gain access to the track stops, pull the upper rack forward
about halfway out of the tub.
To open, flip the track stop toward the outside of the tub.
After opening both track stops, pull top rack out of the rails.
Removable Top Rack (for Ultra Glide rails)
The removable top rack
allows you to wash larger
items such as pots, roasters,
and cookie sheets in the
bottom rack.
IMPORTANT: Remove
dishes prior to removing the
top rack from the
dishwasher.
To remove the rack:
To gain access to the
removable tabs on the
tracks/rails, pull the upper
rack forward about halfway out of the tub.
On one side, press the tab on the track in and pull up the front end
of the rack out of the track. Then repeat this step on the other side
to completely remove the front end of the rack.
Then remove the back end of the rack, by pulling the back end out
with a slightly forward then upward motion.
To replace the rack:
Pull the tracks forward about halfway out of the tub.
Along the sides of the racks are round attachment tabs. Align the
rack's back end attachment tabs with the cutout in the track. Push
down into place.
Pull the tracks completely out, and align the rack's front end
attachment tabs with the cutout in the track. Push down into place.
You will hear a snap when the front end of the rack is secured into
place on each side.
Track stop closed Track stop open