Jensen CD-480 user manual Important Notes, Power Source

Models: CD-480

1 11
Download 11 pages 7.29 Kb
Page 7
Image 7

IMPORTANT NOTES

Avoid installing the unit in locations described below:

Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters.

Dusty places.

Places subject to constant vibration.

Humid or moist places.

POWER SOURCE

This AM/FM CD Player operates on 8 x ‘LR14’ (‘C’) batteries (not included) or from AC 120V~ 60Hz line power supply. Do not attempt to operate the radio on any other power source. You could cause damage to the unit and void your warranty.

Please be sure the power outlet you plug this unit into is working and receives constant (unswitched) power.

A.AC OPERATION

When the AC power cord (included) is connected to the AC INPUT Socket at the back of the unit and the other end to a wall outlet with AC 120V ~ 60Hz power supply, the unit will disconnect the batteries automatically, and operate from AC power instead.

B.BATTERY OPERATION

For better performance and longer operating time, we recommend the use of alkaline-type batteries.

1.Remove the Battery Door.

2.Following the polarity diagram as shown in the battery compartment insert 8 x ‘LR14’ (‘C') batteries then replace the Battery Door.

IMPORTANT: Be sure that the batteries are installed correctly. Wrong polarity may damage the unit.

BATTERY CARE

i.Use only the size and type of batteries specified.

ii.Do not mix old and new batteries.

iii.Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.

iv.If the unit is not to be used for an extended period of time, remove the batteries. Old or leaking batteries can cause damage to the unit and may void the warranty.

v.Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions).

vi.Do not dispose of batteries in fire, batteries may leak or explode.

BATTERY REPLACEMENT

When the output sound of this unit becomes distorted or the CD player operation appears unstable, the batteries are weak. You need to replace all the exhausted batteries at the same time as soon as possible to avoid battery leakage.

E-6

Page 7
Image 7
Jensen CD-480 user manual Important Notes, Power Source