CD6111
INTRODUCTION
Congratulations on your purchase of the Jensen CD6111 Mobile AM/FM/CD Receiver. It’s a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen CD6111 installed by a reputable installation shop.
Features
CD
•
•Last position memory
•Random/repeat/intro
•
•
•
AM/FM TUNER
•24 station presets (12 FM, 6 AM)
•JENSEN Plus Tuner II
•Auto station store/preset scan
•
•Manual stereo/mono, local/distance, and up/down tuning
•Auto seek tuning up/down and
Chassis
•Electronic detachable face with hard case
•Import ISO/DIN mountable
•
General
•High contrast Liquid Crystal Display (LCD)
•Infrared remote control (included)
•iEQ3 - instant EQ with 3 selectable EQ curves - Classic, Pop and Rock
•1 pair each rear RCA auxiliary inputs and
•Rotary encoder audio control with electronic volume, bass, treble, balance, fader
•
•Keyless CD eject
•4V Peak / 2V RMS RCA
•Rear RCA
•
•
•True Blue LED preset illumination
•Loudness
•Clock
•Mute
•Theft deterrent LED
Optional Accessories
jPORT (Sold Separately)
•Controls your iPod and CD Changer
•jLink Apple approved iPod cable (included)
•jLink Adapter (included)
iAux (Sold Separately)
•Converts 3.5mm Input to RCA outputs for auxiliary devices
•
PREPARATION
Tools and Supplies
The following tools and supplies are needed to install the radio.
•Torx type, flathead and Philips screwdrivers
•Wire cutters and strippers
•Tools to remove existing radio (screwdriver, socket wrench set or other tools)
•Electrical tape
•Crimping tool
•Volt meter/test light
•Crimp connections
•18 gauge wire for power connections
•
SPEAKER REQUIREMENTS: Only connect speakers rated in the load impedance of 4 ohms. Speakers with a load impedance less than 4 ohms could damage the unit.
Pre-installation
1.Disconnect Battery
Before you begin, always disconnect the battery negative terminal.
2.Remove Transport Screws
3.Remove Radio from Sleeve
Lift latches on both sides of sleeve to remove
TRANSPORT 
SCREWS
HALF
SLEEVE
1
