TV CONTROLS

Control

Function

1.

POWER

Press to switch unit between On and Standby mode.

2.

OK (ENTER)

Press to choose a menu item or confirm a setting.

3.

MENU/EXIT

While in TV mode, press to bring up the main function menu.

 

 

Inside a function menu, press to end setting mode. Press again to return to TV

 

 

mode.

4.

VOL-

While watching TV, press to decrease the volume output.

 

 

While in main menu, press to select previous function menu, e.g. Audio.

 

 

Inside in a function menu, press to change the setting of the selected menu item.

5.

VOL+

While watching TV, press to increase the volume output.

 

 

While in main menu, press to select next function menu, e.g. Audio.

 

 

Inside in a function menu, press to change the setting of the selected menu item.

6.

CH-

While watching TV, press to recall the previous captured TV channel.

 

 

While in main menu, press to select the first menu item for user adjustment.

 

 

Inside in a function menu, press to move the selection bar down the list.

7.

CH+

While watching TV, press to recall the next captured TV channel.

 

 

Inside in a function menu, press to move the selection bar up the list.

8.

Antenna Input

This jack accepts the external monopole antenna included with your TV set

9.

Built-in Antenna

Fully extend this telescopic antenna for best indoor or outdoor reception.

 

 

Tips: when receiving weak signal in the upper channels, folding back the last

 

 

section may help to improve picture stability.

10. TFT Color

This 16:9 screen delivers vivid pictures at 480H x 272V resolution.

Screen

 

11. Speaker Grille

Do not block these holes where speaker sound is emitted.

 

 

They also serve as ventilation openings while TV is in operation.

12. Foldout Stand

Fold out the stand if you want to keep the TV set upright.

13. Battery

Remove this cover to disconnect the internal Li-ion battery pack for replacement

Compartment Cover

when necessary.

14. Headphone Jack

This jack accepts a pair of stereo earbuds with a standard 3.5mm plug

15. On/Off Switch

This is the main power on/off switch. Always switch to “off” if you are not using

 

 

the TV set for the next few hours to conserve battery power.

16. Charge Indicator

It will light steadily when the AC adaptor is connected and On/Off Switch is set

 

 

to “OFF”.

 

 

It will flash when On/Off Switch is set to “ON” while battery is being recharged.

 

 

It will go off when the AC adaptor is connected and battery has been fully

 

 

charged or the TV is operating on battery power.

17. DC Jack

This jack accepts the included AC adaptor for normal operation and charging.

User manual of JDTV-430, page 5

Page 6
Image 6
Jensen JDTV-430 user manual TV Controls, Control Function