JMD200
TUNER OPERATION
Select a Band
Press the BND button (3) to change between three FM bands and two AM bands.
•During FM operation, when the station is broadcasting in stereo, the stereo icon (
) appears on the display.
•During AM operation, no indications are displayed.
Manual Tuning
Press the TUNE/TRK >> or << buttons (4) to manually step tune to the next or previous frequency.
Auto Seek Tuning
Press and hold the TUNE/TRK >> or << buttons (4) to automatically seek the next strong station.
Preset Stations
Six numbered preset buttons store and recall stations for each band.
Store a Station
Select a band (if needed), then select a station. Press and hold a preset button (6) for two seconds. The preset number will appear on the LCD.
Recall a Station
Select a band (if needed). Press a preset button (6) to select the corresponding stored station.
Automatically Store / Preset Scan (A/PS)
Automatically Store
Select an AM or FM band. Press and hold the A/PS button (5) for more than 2 seconds to automatically select six strong stations and store them in the current band. The new stations replace any stations already stored in that band. This feature is most useful when traveling in a new area where you are not familiar with the local stations.
Preset Scan
Select a band. Press A/PS (5) to scan stations stored in the current band. The unit will pause for 5 seconds at each preset station. Press A/PS again to stop scanning when the desired station is reached.
INT
LOUD
PUSH POWER
8
