Jensen JTA-450 instruction manual Deleting Files, Line Out Operation Optional

4. To start recording briefly press the RECORD Button once.

Copying USB Files to Card Copying Card Files to USB

5. To stop copying, briefly press the STOP Button once.

DELETING FILES

1.With the USB or Card in the playback stop mode, press or Buttons to select the track to delete, for example track 5 is selected.

2.When the desired track appears in the Display press and hold the RECORD Button(17) to confirm. ‘DEL’ will flash few times and then disappear.

The chosen track, ‘005’, will appear and blink in the Display to prompt for confirmation. In case you want to cancel the delete function just briefly press the STOP Button.

3.To confirm, briefly press the RECORD button once. ‘DEL’ will appear steadily in the Display for few seconds and then the Display will resume to USB/Card playback stop mode with the total track number deducted by 1.

Original 38 Files After Deleting track 5

4. Repeat 1-3 above to delete more tracks as desired.

LINE OUT OPERATION (OPTIONAL)

For better playback sound, you can connect the JTA-450 to an external Audio Amplifier via the RCA LINE OUT JACKS located at the back panel. Please proceed as following:

1.Connect the “L” & “R” LINE OUT Jacks and the AUX IN of your Audio Amplifier. (Connection cable is not included).

2.Select the music source by setting the Function Selector (12) to “PHONO”, “USB/SD” or “TUNER” as desired.

3.Turn on the external Amplifier.

12