WARNING

 Do not throw the product into fire to avoid danger of explosion.

 No compensation responsibility for malfunctions caused by improper use.

 Do not attempt to disassemble or alter any part of the unit that is not expressly described in this guide. Internal inspections, alternations and repairs should be conducted by qualified service personnel.

IMPORTANT SAFETY INSTRUCTIONS

1.The apparatus and AC/DC adaptor shall not be exposed to dripping and splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus and AC/DC adaptor.

2.The mains plug of the AC/DC adapter is used as the disconnect device. The power adaptor should always remain readily operable and should not be obstructed OR should be easily accessed during intended use.

3.To completely disconnect the apparatus from supply mains, the mains plug of the AC/DC adapter shall be disconnected from the mains socket outlet completely.

4.Minimum distances of 4 inches (10cm) around the apparatus and AC/DC adapter shall be available for sufficient ventilation.

5.The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-clothes, curtains, etc. ;

No naked flame sources such as lighted candles should be placed on the apparatus.

6.Attention should be drawn to environmental aspects of battery disposal.

7.The apparatus and AC/DC adapter should be used in moderate climates.

8.The rating plate of the apparatus is located on its bottom enclosure.

9.Battery (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

CAUTION FOR LITHIUM BATTERY: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

PROTECT YOUR FURNITURE!!

This system is equipped with non-skid rubber ‘feet’ to prevent the product from moving when you operate the controls. These ‘feet’ are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may cause the rubber ‘feet’ to soften, and leave marks or a rubber residue on the furniture.

To prevent any damage to your furniture we strongly recommend that you purchase small self-adhesive felt pads, available at hardware stores and home improvement centers everywhere, and apply these pads to the bottom of the rubber ‘feet’ before you place the product on fine wooden furniture.

2

Page 1 Page 3
Page 2
Image 2
Jensen SMPS-125 user manual Important Safety Instructions
Page 1 Page 3

SMPS-125 specifications

The Jensen SMPS-125 is an innovative switching power supply designed to cater to the stringent demands of modern electronic devices. Known for its compact design, efficiency, and reliability, the SMPS-125 is ideal for a variety of applications ranging from consumer electronics to industrial machinery.

One of the standout features of the Jensen SMPS-125 is its compact form factor. Measuring just a fraction of the size of traditional linear power supplies, it allows for flexible integration into tight spaces within electronic enclosures. This design not only saves space but also contributes to the overall weight reduction of the device, making it an excellent option for portable equipment.

Efficiency is another hallmark of the Jensen SMPS-125. The power supply typically boasts an efficiency rating exceeding 85%, minimizing energy loss and reducing heat generation. This high efficiency results in lower operational costs and less strain on cooling systems, contributing to the overall sustainability of the end product.

The SMPS-125 employs advanced switching technology, which enables it to convert electrical energy with minimal waste. The power supply features a wide input voltage range, accommodating global power standards. This versatility allows the SMPS-125 to be used in various regions without the need for additional transformers or voltage adjusting devices, enhancing its practicality for international applications.

In terms of output, the Jensen SMPS-125 is designed to provide stable and reliable power, crucial for sensitive electronic components. With multiple output options available, the supply can cater to different voltage needs, ensuring compatibility with a wide array of devices. The output is also regulated, providing consistent performance even under varying load conditions.

Moreover, the Jensen SMPS-125 is equipped with comprehensive protection features, including over-voltage, over-current, and short-circuit protection. These safety features ensure that the connected devices are safeguarded against potential electrical anomalies, increasing the longevity and reliability of the overall system.

In conclusion, the Jensen SMPS-125 embodies a harmonious blend of efficiency, reliability, and versatility. Its compact size, high efficiency, advanced switching technology, stable output, and robust protection mechanisms make it a top choice for designers and engineers seeking a dependable power supply solution for their electronic applications.
Top Page Image Contents