Jensen VR209 operation manual Basic Operation

VR209

BASIC OPERATION

3 18 24

17

2

16

14

4

26

11

1

i

Mode

Press the MODE button (4) on the control panel to select a different mode of operation, as indicated on the display panel. Available modes include TUNER, CD, SIRIUS, IPOD and

AUXILIARY.

23NOTE: IPOD or SIRIUS mode will be skipped if the module is not installed.

21Adjusting the Clock (INFO SCROLL)

12The current time is displayed in the lower right hand corner of the LCD display.

20To adjust the clock:

151. Press and hold the INFO SCROLL button (14) until the hour flashes on the LCD.

2.Press the SEEK /\ button (20) to adjust the minutes (press and hold to fast forward) within

135 seconds.

3.Press the SEEK \/ button (19) to adjust the hour (press and hold to fast forward) within 5

19seconds.

4.Press INFO SCROLL again to exit time set mode. After 5 seconds, time set mode will exit

22automatically.

NOTE: If the time mode is set to “12HR” in the setup menu, continue pressing the SEEK \/ button to change between AM (A) and PM (P).

5 6 7 27 8 9 10

Power On/Off

Press the power button (3) to turn the unit on/off.

Volume Control

To increase the volume, rotate the VOL control (1) clockwise. The maximum level is “40”. To decrease the volume, rotate the VOL control counter-clockwise.

Mute

Press the MUTE button (26) on the control panel to mute the audio output. “MUTE” will flash on the LCD display.

NOTE: If “P-CLOCK” is turned “ON” in the setup menu, the clock will be displayed in the center of the LCD in large characters when the unit is turned off while the ACC is on.

Reset

Use a ball point pin or thin metal object to press the RESET button (18). The reset button should be activated for the following reasons:

•initial installation of the unit when all wiring is completed

•function buttons do not operate

•error symbol on the display

Audio Menu

Press the VOL/AUDIO SETTINGS button (1) on the control panel to access the Audio Menu. You can navigate through the Audio Menu items by pressing the VOL/AUDIO SETTINGS button repeatedly. Once the desired menu item appears on the display, adjust that option by turning the VOL/AUDIO SETTINGS control (1) within 5 seconds. The unit will automatically exit the Audio Menu after five seconds of inactivity. The following menu items can be adjusted.

Press MUTE again to restore the audio output to the previous level.

Bass Level

6