Grounding Instructions

This tool must be grounded while in use to protect the operator from electric shock.

In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This tool is equipped with an electric cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Do not modify the plug provided. If it will not fit the outlet, have the proper outlet installed by a qualified electrician.

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. The conductor, with insulation having an outer surface that is green with or without yellow stripes, is the equipment-grounding conductor. If repair or replacement of the electric cord or plug is necessary, do not connect the equipment-grounding conductor to a live terminal.

Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if in doubt as to whether the tool is properly grounded. Use only three wire extension cords that have three-prong grounding plugs and three-pole receptacles that accept the tool’s plug.

Repair or replace a damaged or worn cord immediately.

115 Volt Operation

As received from the factory, your sander is ready to run at 115-volt operation. This sander, when wired for 115 volts, is intended for use on a circuit that has an outlet and a plug that looks the one illustrated in Figure A. A temporary adapter, which looks like the adapter as illustrated in Figure B, may be used to connect this plug to a two-pole receptacle, as shown in Figure B if a properly grounded outlet is not available. The temporary adapter should only be used until a properly grounded outlet can be installed by a qualified electrician. This adapter is not applicable in Canada. The green colored rigid ear, lug, or tab, extending from the adapter, must be connected to a permanent ground such as a properly grounded outlet box, as shown in Figure B.

The use of an extension cord is not recommended. However, if you must use one make sure your extension cord is in good condition. Be sure to use one heavy enough to carry the current your machine will draw. An undersized cord will cause a drop in the line voltage resulting in power loss and overheating. The following table shows the correct size to use depending on the cord length needed and the nameplate ampere rating. If in doubt, use the next heavier gauge. Remember, the smaller the gauge number, the heavier the cord.

 

Volts

 

 

Total Length of Cord in Feet

 

 

120V

 

25

 

50

 

100

150

 

 

 

 

 

 

AWG

 

 

 

 

12-16

 

14

 

12

 

Not Recommended

 

 

Amps

 

 

 

 

 

 

 

 

 

 

 

 

 

5

Page 4 Page 6
Page 5
Image 5
Jet Tools 708358 operating instructions Volt Operation, Volts Total Length of Cord in Feet
Page 4 Page 6

708358 specifications

The Jet Tools 708358 is a powerful and reliable 15-Inch Planer, designed for both professional woodworkers and serious DIY enthusiasts. This robust machine combines advanced features with efficient performance, making it a valuable addition to any workshop.

One of the key highlights of the Jet 708358 is its powerful 3 HP motor, which operates at a 230V power supply. This motor provides the necessary torque to handle dense hardwoods and ensures consistent performance across a variety of applications. The combination of this motor and high-quality components makes it an excellent choice for those looking to achieve precision and speed in their woodworking tasks.

The Jet 708358 features a massive 15-inch cutting width, allowing users to tackle larger workpieces with ease. Its precise depth adjustment mechanism enables users to set the depth of cut from 1/16 inch up to a maximum of 1/8 inch. This feature is particularly useful when working with materials of different thicknesses, ensuring versatile operation without sacrificing accuracy.

Another notable technology integrated into the Jet 708358 is its helical cutter head. Unlike traditional straight blades, the helical design features multiple, staggered cutting edges that significantly reduce noise and provide a smoother finish on the workpiece. This cutter head also increases the lifespan of the knives, requiring less frequent replacements and maintenance.

The built-in dust collection system is another standout characteristic, featuring a 4-inch port that effectively removes wood shavings and debris from the work area. This not only keeps the workspace clean but also enhances visibility and safety during operation.

Additionally, the Jet 708358 is equipped with a user-friendly control panel, featuring easy-to-read depth adjustment levers and a convenient on/off switch. The sturdy, cast-iron frame ensures stability and reduces vibration, contributing to the accuracy and quality of every cut.

Overall, the Jet Tools 708358 offers a combination of power, technology, and features that make it a top choice for woodworkers seeking reliable and high-quality performance in their planing tasks. With its exceptional cutting capabilities and user-oriented design, it stands as a trusted workhorse in any woodworking environment.
Top Page Image Contents