Introduction

This manual is provided by JET covering the safe operation and maintenance procedures for model DC-1100 Series Dust Collectors. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed to provide years of trouble free operation if used in accordance to instructions set forth in this manual. If there are any questions or comments, please contact either your local supplier or WMH Tool Group.

Specifications

Model

DC-1100A/RC

...................................................... DC-1100C/RC

Stock Number

708639/RC

........................................................ 708626C/RC

Blower Wheel Diameter

11"

........................................................................ 11”

Sound Rating at 3 feet

70-80 db

............................................................... 70-80 db

Hose Diameter

4" & 6”

.................................................................. 4" & 6”

Air Flow (CFM)

1,100

.................................................................... 1,100

Velocity at 4” (FPM)

8,464

.................................................................... 8,464

Static Pressure (inch of water)

11.5

...................................................................... 11.5

Bag Diameter

20"

........................................................................ 20"

Bag Length

46” & 29"

.............................................................. 46” & 29"

Collector Bag Capacity (cu. ft.)

5.6

........................................................................ 5.6

Overall Dimensions

37"L x 28"W x 79"H

....................................... 37"L x 28"W x 71-1/8"H

Motor (TEFC)

1-1/2 HP, 1Ph 115/230V 115V Prewired

............. 1-1/2 HP, 1Ph 115/230V 115V Prewired

Net Weight (approx.)

103 lbs

124 lbs.

The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, WMH Tool Group reserves the right to change specifications at any time and without prior notice, without incurring obligations.

Ordering Replacement Parts

Replacement parts are listed in the back of this manual. To order parts or reach our service department, call 800-274-6848 between 7:00 a.m. and 6:00 p.m. (CST), Monday through Friday. Having the Model Number and Serial Number of your machine available when you call will allow us to serve you quickly and accurately.

6

Page 6
Image 6
Jet Tools DC-1100G operating instructions Introduction, Specifications, Ordering Replacement Parts