WARNING

1.Read and understand the entire contents￿of this manual before attempting assembly or operation. Do not use this machine until proper training and knowledge has been obtained.

2.Do not leave Dust Collector when plugged in. Unplug from outlet when not in use and before servicing.

3.Do not use outdoors or on wet surfaces.

4.Do not allow to be used as a toy. Close attention is necessary when used near children.

5.Use only as described in this manual. Use only manufacturer’s recommended attachments.

6.Do not use with damaged cord or plug. If Dust Collector is not working as it should, has been dropped, damaged, left outdoor, or dropped in water, return it to a service center.

7.Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run Dust Collector over cord. Keep cord away from heated surfaces.

8.Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

9.Do not handle plug or Dust Collector with wet hands.

10.Do not put any objects into the openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.

11.Keep hair, loose clothing, fingers, and all parts of body away from opening and moving parts.

12.Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

13.Do not use without dust bag and/or filters in place.

14.Turn off all controls before unplugging.

15.Use extra care when cleaning on stairs.

16.Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where they may be present.

17.Do not operate without hose connected to the hose inlet. Hazardous moving parts inside. Unplug before removing hose inlet or impeller guard.

18.Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•Lead from lead based paint

•Crystalline silica from bricks and cement and other masonry products, and

•Arsenic and chromium from chemically-treated lumber.

19.Your risk from those exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specifically designed to filter out microscopic particles

20.Do not operate tool while under the influence of drugs, alcohol or any medication.

21.Make sure the extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersize cord will cause a drop in the line voltage resulting in loss of power and overheating. The table below shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gauge. The smaller gauge number, the heavier the cord.

22.Static electricity will build up in the filter during operation. The filter ground must be attached to the machine ground, and to the filter.

Cord Length

Cord Gauge

25’

16 AWG

50’

16 AWG

100’

14 AWG

150’

12 AWG

SAVE THESE INSTRUCTIONS

3

Page 2 Page 4
Page 3
Image 3
Jet Tools DC-650TS owner manual Cord Length Cord Gauge
Page 2 Page 4

DC-650TS specifications

The Jet Tools DC-650TS is a reliable and highly efficient dust collector that's designed to enhance the woodworking experience by ensuring a clean and safe workspace. Aimed particularly at hobbyists and professionals alike, the DC-650TS combines power, portability, and cutting-edge technology to address the dust collection needs of various wood projects.

One of the standout features of the DC-650TS is its powerful 1 HP motor, which delivers a strong airflow capable of managing multiple tools simultaneously. With an airflow capacity of 650 CFM, this dust collector is well-equipped to capture fine dust particles generated during woodworking processes, ensuring a cleaner environment and improved air quality.

The Jet DC-650TS employs a compact and portable design, featuring a sturdy yet lightweight construction that allows it to be easily moved around the workshop. Equipped with a convenient wheel base, users can effortlessly transport the unit to where it's needed most. This mobility does not compromise the machine's stability, as its design ensures it remains firmly planted during operation.

Another notable feature is the machine's innovative bag design. The DC-650TS comes with a large, transparent collection bag that allows users to monitor the fill level without opening the unit. This feature promotes efficiency, enabling you to empty the bag at the right time for optimal performance. Furthermore, the bags are made from durable materials, providing both longevity and effective dust containment.

Technologically, the DC-650TS includes a dual-port design that allows for the connection of two machines simultaneously. This versatility is particularly beneficial when working in a busy woodworking environment where multiple tools may need to be used at once. The quick-release feature facilitates easy attachment and detachment of hoses, ensuring that swapping between machines is a hassle-free process.

In terms of noise management, the Jet Tools DC-650TS is designed with user comfort in mind. The unit operates at a relatively low noise level, making it a suitable option for those who may be sensitive to sound, thus allowing you to work more comfortably for longer periods.

Overall, the Jet Tools DC-650TS stands out as a robust dust collection solution that effectively combines power, portability, and user-friendly features. Its capacity for managing multiple connections, durable construction, and quiet operation make it an excellent choice for both casual woodworkers and seasoned professionals seeking to maintain a clean and efficient workspace.
Top Page Image Contents