24.Check centers and center sockets in the headstock and tailstock to be sure they are free of dirt or rust and oil lightly before inserting centers.

25.Test each set-up by revolving the work by hand to insure it clears the tool rest and bed. Check setup at the lowest speed before increasing it to the operating speed.

26.Use the correct cutting tool for the operation to be performed and keep all tools in a sharpened condition.

27.Use low speeds for roughing and for long or large diameter work. If vibration occurs, stop the machine and correct the cause. See speed recommendations.

DIAMETER OF WORK

ROUGHING RPM

GENERAL CUTTING

FINISHING RPM

RPM

 

 

 

 

 

 

 

Under 2"

1520

3200

3200

 

 

 

 

2 to 4"

760

1600

2480

 

 

 

 

4 to 6"

510

1080

1650

 

 

 

 

6 to 8"

380

810

1240

 

 

 

 

8 to 10"

300

650

1000

 

 

 

 

10 to 12"

255

540

830

 

 

 

 

12 to 14"

220

460

710

 

 

 

 

14 to 16"

190

400

620

 

 

 

 

28.When sanding, remove the tool rest from the machine, apply light pressure, and use a slow speed to avoid heat build up.

29.When turning large diameter pieces, such as bowls, always operate the lathe at low speeds. See speed recommendations.

30.Do not attempt to engage the spindle lock pin until the spindle has stopped. If leaving the machine area, turn it off and wait until the spindle stops before departing.

31.Make no adjustments except speed change with the spindle rotating and always disconnect machine from power source when performing maintenance to avoid accidental starting or electrical shock.

32.Provide for adequate surrounding work space and overhead non-glare lighting.

33.When stopping the lathe, never grab the part or face plate to slow it down. Let the work coast to a stop.

34.Use only JET factory authorized replacement parts and accessories, otherwise the warranty and guarantee are null and void.

35.Do not use this JET wood lathe for other than its intended use. If used for other purposes, JET disclaims any real or implied warranty and holds itself harmless from any injury that may result from that use.

4

Page 3 Page 5
Page 4
Image 4
Jet Tools JWL-1642EVS owner manual Diameter of Work Roughing RPM General Cutting Finishing RPM
Page 3 Page 5

JWL-1642EVS specifications

The Jet Tools JWL-1642EVS and JWL-1642EVS-2 are standout lathes in the realm of woodturning, designed for both novice and seasoned woodworkers. These lathes offer unmatched versatility and precision, making them ideal for a wide variety of turning projects, from simple spindles to complex bowls.

One of the most notable features of the JWL-1642EVS is its powerful 1.5 HP motor that delivers excellent torque across a wide range of RPMs. This enhanced performance allows users to work with various wood species while maintaining smooth operation, a critical factor for achieving a high-quality finish. The electronic variable speed (EVS) control system provides convenient adjustments, allowing artisans to select the optimal speed for their specific turning needs. With a speed range from 40 to 3,600 RPM, craftspeople can effortlessly switch between fine detail work and aggressive stock removal.

The lathe's robust design is complemented by a cast iron bed that minimizes vibrations and ensures stability during operation. This construction not only enhances durability but also contributes to precise results, allowing users to create intricate designs without worrying about inconsistencies in the finish. Additionally, the JWL-1642EVS-2 variant offers an even larger capacity, with an impressive 16-inch swing over the bed and 42-inch length, accommodating larger workpieces.

Furthermore, both models feature a convenient electronic spindle lock, making the process of changing chucks and accessories quick and efficient. The adjustable swivel headstock allows for greater flexibility in accessing various angles, providing users with more control and comfort during operation.

Safety is also a priority in the design of the JWL-1642EVS and JWL-1642EVS-2, with features such as a safety restart switch, ensuring that the lathe cannot restart unexpectedly after a power interruption. Easy-to-read digital readouts for speed settings further enhance user experience by allowing for precise monitoring while turning.

Overall, the Jet Tools JWL-1642EVS and JWL-1642EVS-2 combine advanced technology, durable construction, and user-friendly features, making them indispensable tools for any woodturner looking to expand their craft and achieve professional-quality results. Whether you’re creating functional items or artistic pieces, these lathes empower users to elevate their woodturning endeavors.
Top Page Image Contents