JL Audio owner manual Subwoofer Specifications, 10W3v2-D2, 10W3v2-D4, 10W3v2-D6, Wiring Options

SUBWOOFER SPECIFICATIONS

SUBWOOFER:	10W3v2-D2	10W3v2-D4	10W3v2-D6
Free Air Resonance (Fs):	28.1 Hz	28.4 Hz	29.3 Hz
Electrical “Q” (Qes):	0.474	0.527	0.547
Mechanical “Q” (Qms):	9.50	9.50	9.50
Total Speaker “Q” (Qts):	0.452	0.499	0.517
Equiv. Compliance (Vas):	1.71 ft3	1.71 ft3	1.71 ft3
	48.4 litres	48.4 litres	48.4 litres
One-way, Linear Excursion:	0.549 in	0.579 in	0.513 in
(Xmax)*	13.9 mm	14.7 mm	13.0 mm
Efficiency (1W/1m)**:	85.4 dB	85.2 dB	85.5 dB
Effective Piston Area (Sd):	53.5 in2	53.5 in2	53.5 in2
	0.0345 m2	0.0345 m2	0.0345 m2
DC Resistance (Re)***:	3.31Ω	6.94Ω	10.96Ω
Nominal Impedance:	Dual 2Ω	Dual 4Ω	Dual 6Ω
Power Handling (continuous):	300W	300W	300W
Mounting Depth:	5.75 in	5.75 in	5.75 in
	146 mm	146 mm	146 mm
Mounting Hole Diameter:	9.125 in	9.125 in	9.125 in
	232 mm	232 mm	232 mm
Driver Displacement:	0.05 ft3	0.05 ft3	0.05 ft3
	1.42 litres	1.42 litres	1.42 litres

*Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. **Efficiency (1W/1m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder”. ***Re (DC resistance) is measured with the voice coils in series, for parallel-wired specification divide Re by 4. All other specifications remain the same.

WIRING OPTIONS

W 3 v 2 VO I C E C O I L S I N S E R I E S : W 3 v 2 VO I C E C O I L S I N PA R A L L E L :

	W3v2-D6: 12.0Ω				W3v2-D6: 3.0Ω
AMPLIFIER	W3v2-D4:	8.0	Ω	AMPLIFIER	W3v2-D4:	2.0
						Ω
	W3v2-D2:	4.0Ω			W3v2-D2:	1.0Ω

W3v2-D6: 6.0Ω	W3v2-D6: 1.5Ω
AMPLIFIER W3v2-D4: 4.0Ω	AMPLIFIER W3v2-D4: 1.0Ω
W3v2-D2: 2.0Ω	W3v2-D2: 0.5Ω

	W3v2-D6: 4.0Ω			W3v2-D6: 1.0Ω
AMPLIFIER	W3v2-D4:	2.7	AMPLIFIER	W3v2-D4:	0.7	Ω
		Ω
	W3v2-D2:	1.3Ω		W3v2-D2:	0.3Ω

2 JL AUDIO 10W3v2