JL Audio IWS-SYS-2, IWS-SYS-1 owner manual Stereo Active Crossover Balanced Outputs

Models: IWS-SYS-1 IWS-SYS-2

1 32
Download 32 pages 37.68 Kb
Page 22
Image 22

STEREO ACTIVE CROSSOVER (BALANCED OUTPUTS)

STEREO ACTIVE CROSSOVER (UNBALANCED OUTPUTS)

LOW OUT

(SUB OUT)

LOW OUT

(SUB OUT)

LEFT RIGHT

OR

FATHOM REAR CONTROLS (MASTER)

WARNING! TURN OFF THE Fathom IWS AND ALL OTHER EQUIPMENT IN THE SYSTEM BEFORE MAKING OR CHANGING ANY CONNECTIONS!

SYSTEM CONNECTION DIAGRAM 3: One Fathom IWS in Mono to Two-Channel Audio System

When connecting a Fathom IWS (or multiple Fathom IWSs) in mono to a two- channel audio system you will use both the “Left or Mono” and the “Right” inputs. Summing circuitry in the Fathom IWS’s input section will sum the stereo signals to mono.

We strongly recommend that you use a high-quality active crossover to divide your preamplifier’s signals prior to connection to the Fathom IWS and to the amplifier driving your main speakers. This will allow you to filter low frequencies out of the signals driving the main speakers, resulting in better performance.

If you are not using an active crossover and are comfortable running your main speakers full-range, you can split your preamplifier’s output signals using appropriate Y-connectors in place of the active crossover shown in the diagram.

Two connection types are available for connecting the Fathom IWS to your two-channel audio system: balanced (XLR or 1/4-inch TRS connector) and unbalanced (RCA-type connector). Balanced connections provide superior noise rejection and ensure proper grounding between components. If your preamplifier or active crossover offers balanced outputs, we highly recommend that you use them.

In the connection diagram at left, balanced connections are shown as solid lines, unbalanced connections are shown dotted. You will only use one of these input connection methods (not both).

NOTE: If desired, additional Fathom IWSs can be connected in “Slave” mode to the Fathom IWS connected as shown on this diagram. See “Connection Diagram 2” on page 23 for slave connection explanation.

WARNING

Page 22

Fathom IWS

Page 22
Image 22
JL Audio IWS-SYS-2, IWS-SYS-1 owner manual Stereo Active Crossover Balanced Outputs