S T E P 4

Remove the driver’s and passenger’s side folding floor extensions.

SB-D-MGACAB/10W6v2_INSTR_SKU# 011217

S T E P 8

Position the enclosure and press firmly down. This is to leave an impression onto the wax squares.

9-1/4-inches

 

31-3/4-inches

4-inches

S T E P 5

As in the picture, measure for the exact placement of the wax square.

Remove the paper backing from one of the supplied wax squares. Apply the wax square onto the flooring behind the rear seating on the driver's side.

S T E P 9

Place the Stealthbox® upside down on the folded rear seats. Back out both socket cup set screws to expose 1-1/5".

With an 1/2" drill bit and drill. Drill through the floor at the wax squares, using the impressions of the socket cup set screw as a guide.

Once both holes have been drilled, remove both wax sqaures.

9-1/4-inches

31-3/4-inches

S T E P 6

The 31-3/4" measurement is starting from the middle of the first wax square to the left, as seen in S T E P 5 & 6 .

Remove the paper backing from the second supplied wax square. Apply this second wax square 31-3/4" to the left of the first wax square.

S T E P 1 0

Place the Stealthbox® into place. Carefully guiding the socket cup set screws through the drilled holes.

Run speaker wire from the amplifier location to the enclosure and attach to the terminal.

Check the woofers for proper operation.

S T E P 7

Thread in the two supplied socket cup set screws to the bottom of the Stealthbox®. Leaving about 1/4" exposed.

STEALTHBOX WALL

THREADED INSERT

 

SILCONE SEALANT

VEHICLE SHEET METAL

FENDER WASHER

 

FLAT WASHER

SOCKET CUP SET SCREW

 

LOCK WASHER

 

HEX NUT

 

S T E P 1 1

From under the vehicle, place the supplied fender washers, flat washers, lock washers and then hex nuts onto each protruding socket cup set screw and secure. Adjust the amount of exposed thread on each cup set screw if necessary.

Note: For added protection, it is recommended that you apply a bead of silicone between the vehicle and the fender washer. After the bolt assembly is tightly secured, it is also recommended that vehicle under- coating material is applied to the exposed assembly.

Page 2 • JL Audio, Inc 2006

Continued on Next Page

Page 1 Page 3
Page 2
Image 2
JL Audio SB-D-MGACAB/10W6v2 warranty inches 31-3/4-inches, E P 1
Page 1 Page 3

SB-D-MGACAB/10W6v2 specifications

The JL Audio SB-D-MGACAB/10W6v2 is a premium subwoofer enclosure that has been engineered to deliver exceptional bass performance specifically designed for select vehicles, such as the Jeep Wrangler JL. This enclosure is a perfect pairing for the iconic 10W6v2 subwoofer from JL Audio, known for its superb audio fidelity and power handling capabilities.

One of the main features of the SB-D-MGACAB/10W6v2 is its rugged, vehicle-specific design. This enclosure is built to fit seamlessly into the interior of your vehicle, ensuring that it doesn’t compromise on space or aesthetics. Constructed from high-quality MDF, the enclosure is designed to be both lightweight and durable, providing a sturdy housing for the powerful 10W6v2 subwoofer, which features a dual 4-ohm voice coil configuration.

The enclosure is optimized for acoustic performance, utilizing a sealed design that enhances the overall sound quality. This design contributes to tight and accurate bass reproduction, making it ideal for bass enthusiasts who seek a dynamic listening experience. The enclosure is also strategically tuned to work in perfect harmony with the capabilities of the 10W6v2, ensuring that users experience the full spectrum of audio frequencies with precision and clarity.

Another significant characteristic of the SB-D-MGACAB/10W6v2 is its ease of installation. It comes with all necessary mounting hardware, allowing for a straightforward installation process that caters to both novice and experienced installers. The enclosure includes a molded mounting system that ensures the subwoofer is secure while also minimizing vibrations, which can detract from the audio experience.

In terms of aesthetics, the SB-D-MGACAB/10W6v2 features a sleek design that complements the interior of modern vehicles while maintaining a rugged look. Its exterior is finished with a premium-grade carpet that not only looks great but also provides protection against everyday wear and tear.

To summarize, the JL Audio SB-D-MGACAB/10W6v2 is an exceptional subwoofer enclosure that combines innovative design and superior technology. With its vehicle-specific fit, durable construction, optimized acoustic performance, and easy installation, it is a top choice for anyone looking to upgrade their car audio system for deep, impactful bass and striking sound quality. Whether you’re a casual listener or a devoted audiophile, the SB-D-MGACAB/10W6v2 offers an unparalleled audio experience that will enhance your driving adventures.
Top Page Image Contents