S T E P 4
Hold the Stealthbox with the woofers pointing down and the bottom of the enclosure (where the two threaded inserts are) towards you as Bill is demonstrating here.
S T E P 5
Slide the enclosure through the opening into the trunk with the woofers facing down, be carefull not to scar the woofer surface (especially on custom painted enclosures!)
S T E P 6
As the Stealthbox® is being slid in position, rotate it so that it lies roughly in position with the woofers pointing down. the single threaded insert can be seen at the arrow point.
S t e p 7
There are three custom brackets and associated bolts that are supplied with the Stealthbox® the two Bottom Angle Brackets as seen in the center and right in the picture at right are mounted on the bottom of the enclosure while the Top Center Bracket is shown at far left.
S T E P 8
Looking from the front of the vehicle back, mount each of the Bottom Angle Brackets as shown in Step 7 using the supplied
S T E P 9
Now is an excellent time to run the wire for the Stealthbox® behind the
S T E P 1 0
Once both of the bottom Angel Brackets are mounted, tilt the enclosure up into place.
S T E P 1 1
Make sure that the two Bottom Angle Brackets grab the bottom lip of the trunk pass through as shown by the arrows.
Page 2 • JL Audio, Inc 2009 | Continued on Next Page |
