JL Audio SB-SC-XB/10W3v3-4, SB-SC-XB/12W3v3-4 warranty Estimated Time, Hour, E P

SB-SC-XB/10W3v3-4 INSTR_SKU# 011277

I n s t a l l a t i o n G u i d e

for the

SB-SC-XB/12W3v3-4

SKU#011277

2000

If you choose to perform the installation yourself, it is absolutely vital that the Stealthbox® be properly mounted to the vehicle according to these instructions. Failure to mount the enclosure properly presents two problems:

1)The sub-bass performance will suffer due to the movement of the enclosure caused by the force exerted by the woofer(s).

2)A loose enclosure presents a serious safety hazard in the event of a collision or sudden deceleration.

INSTALLATION D I F F I C U LT Y :

1OUT OF

5

Estimated TIME:

1 HOUR

Thank you for choosing a JL Audio Stealthbox® for your automotive sound system. With proper

installation, your new vehicle-specific enclosed subwoofer system will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox® installed by your authorized JL Audio dealer. The installation professionals employed by your dealer have the necessary tools and experience to disassemble and reassemble your vehicle properly. Also, keep in mind that your warranty coverage extends to 2 years if your system is installed or approved by your authorized JL Audio dealer. If you prefer to perform your own installation, please read this installation guide completely

before beginning the process.

S T E P 1

Remove anything stored in the passenger rear corner of the trunk so that you are working in a clean environment.

Unpack the Stealthbox® and test for proper operation before continuing!

The wiring for the Stealthbox® should go from the seam between the seatback and the floor to the amplifier location.

S T E P 2

Place the wax square as shown onto the interior panel.

Remove the two cargo anchors from the mounts as indicated by the arrows. These anchors will be installed on the Stealthbox.

S T E P 3

Locate the threaded insert for the the mounting bolt, thread the 3/8-16 bolt in so that only approximately 1/2” remains out (see Detailed picture on next page).

Continued on Next Page