S T E P 4

Place the enclosure in position, pushing down so that indentations are produced in the 3” x 3” Wax Squares as shown in Step 5.

S T E P 5

If indentations are not produced as shown after Step 4, back the 3/8-16 x 2 1/4” Set Screws out of the enclosure in 1/8” increments and repeat Step 4 until there are two clearly defined indentations in the 3” x 3” Wax Squares.

Once the identations are made, back out the 3/8-16 x 2 1/4” Set Screws until approximately 1 1/4” is exposed. This is also a good time to verify the performance of the subwoofer before mounting it.

S T E P 6

Using the identations made in Step 5 as a guide, drill a 1/2” hole through the floor in both locations.

*CAUTION*

Before drilling, always make sure that you are not going to be drilling into any gas lines, brake lines, transmission lines, electrical wiring, exhaust systems or anything else that might cause a reduction in your weekly pay. Always wear eye protection when drilling.

 

 

 

SB-SC-XBG1/10W1v2 INSTR_SKU# 011283

I N C L U D E D H A R D W A R E

 

 

 

2)

3/8” Split Lock Washer

2)

3/8” x 1 1/4” Fender Washer

2)3/8-16 x 2 1/4” Set Screw

2)

3/8-16 Hex Nut

2)

3” x 3” Wax Square

 

 

 

S P E C I F I C A T I O N S

Enclosure Type: Acoustic Suspension (sealed)

Driver Type: 10W1v2-4

Nominal Impedance: 4 Ohms

Continuous Power Handling: 300 Watts

P o w e r R e c o m m e n d a t i o n

JL Audio recommends using a high quality amplifier such as the JL Audio 250/1v2.

The diagram below shows the recommended crossover, infrasonic filter and equalizer settings for the 250/1v2 when being used to power your Stealthbox®.

The JL Audio 250/1v2 is a very versatile audio component. Please consult the owner’s manual for even more detailed information about installing and tuning this amplifier.

M I D / H I G H F r e q u e n c y D r i v e r F I T M E N T

A variety of JL Audio coaxial and component systems will fit in the factory speaker locations of you vehicle.

Front Speaker Size / Location: 6 1/2””- Front Doors

Fits JL Audio Models: TR650-CXi, TR650-CSi, VR650-CXi, VR650-CSi, C5-650, C5-650x & ZR650-CSi

Rear Speaker Size / Location: 6 1/2”- Rear Door

Fits JL Audio Models: TR650-CXi, TR650-CSi, VR650-CXi, VR650-CSi,

C5-650, C5-650x & ZR650-CSi

STEALTHBOX WALL

THREADED INSERT

 

 

VEHICLE SHEET METAL

FENDER WASHER

SOCKET CUP SET SCREW

 

LOCK WASHER

 

HEX BOLT

 

S T E P 7

Install included hardware as shown on each of the 3/8-16 x 2 1/4” Set Screws. Connect the wire from the amplifier, re-install the seat that was removed at the start, plug in the seatbelt sensor that was unplugged.

C O N G R A T U L A T I O N S !

You have completed the installation for this model!

Enjoy your new Stealthbox®!

Please refer to the Power Recommendation section for an amplifier recommendation and basic set-up help.

(954) 443-1100

www.jlaudio.com

All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered trademarks of JL Audio, Inc. “Ahead of the Curve” and its respective logo is a trademark of JL Audio, Inc.

JLA-SKU# ******** **-**-2008 • Printed in USA • ©2008 JL Audio, Inc. • U.S. PATENTS: #5,734,734 #5,949,898 #6,118,884 #6,229,902 #6,243,479 #6,294,959 #6,501,844 #6,496,590 #6,441,685 #5,687,247 #6,219,431 #6,625,292 #D472,891 #D480,709 Other U.S. & Foreign patents pending. For more detailed information please visit us online at www.jlaudio.com.

Page 2 • JL Audio, Inc 2008

1 0 3 6 9 N O R T H C O M M E R C E P A R K W A Y • M I R A M A R , F L O R I D A • 3 3 0 2 5 • U S A

Page 2
Image 2
JL Audio SB-SC-XBG1/10W1v2 manual N G R a T U L a T I O N S, C L U D E D H a R D W a R E, Specification S

SB-SC-XBG1/10W1v2 specifications

The JL Audio SB-SC-XBG1/10W1v2 is a premium bass solution designed for those seeking high-quality audio performance in their vehicles. This custom-fit subwoofer system combines cutting-edge technology and superior craftsmanship, making it a top choice for audiophiles and casual listeners alike.

One of the main features of the SB-SC-XBG1/10W1v2 is its compact and efficient design. It integrates a 10-inch W1v2 subwoofer, which is renowned for its impressive deep bass response and reliability. The enclosure is specifically engineered to maximize the performance of the subwoofer, ensuring optimal sound quality and ease of installation.

The system employs a unique enclosure design that is constructed from high-quality MDF, offering durability and reducing distortion. The enclosure features a sleek, low-profile design that easily fits into most vehicles without sacrificing cargo space. This is particularly important for those who need both function and performance in their audio systems.

The W1v2 subwoofer itself is a key standout feature. It boasts a sophisticated injected molded polypropylene cone, which ensures accurate sound reproduction with minimal distortion. The subwoofer incorporates advanced cooling technologies, including a specially designed venting system that helps maintain optimal operating temperatures, even during extended listening sessions. This feature not only extends the life of the subwoofer but also enhances its performance.

Another noteworthy characteristic of the SB-SC-XBG1/10W1v2 is its power handling capabilities. With a peak power handling of 500 watts and a continuous power rating of 300 watts RMS, this subwoofer can deliver robust and undistorted bass. The voice coil is constructed with high-temperature materials, allowing it to handle heavy use without compromising sound quality.

Furthermore, installation is simplified thanks to the comprehensive wiring kit included with the system. JL Audio has placed a strong emphasis on user experience, ensuring that both professional installers and DIY enthusiasts can set up the system with ease, providing a hassle-free audio upgrade.

In summary, the JL Audio SB-SC-XBG1/10W1v2 is a remarkable subwoofer system that combines advanced technology, superior craftsmanship, and thoughtful design. With its impressive bass response, durable construction, and ease of installation, it stands out as an exceptional choice for anyone looking to elevate their in-car audio experience. Whether cruising down the highway or navigating city streets, users can trust that this system will deliver powerful, crystal-clear sound that enhances every journey.