Technical Speciﬁcations, Display CLOCK&CALENDAR, Pdj

2.3.Installing and Replacing the Remote Control Battery

1.Place the Remote Control with the control buttons facing downward.

2.While pressing down on the ridged area of the battery cover pull the tray out.

3.Place a “CR2025” lithium battery on the tray with the positive “+” end facing toward you.

4.Close the tray.

-Press [CLOCK] key on remote control into COLCK & CALENDAR interface, see following screen cut picture:

-Press [CLOCK] key again return to main menu.

Note: Clock and Alarm settings are in the setup menu!

•Display: 8.4 inch (21.3 cm)

•Resolution: 800 x 600 pixels

•Internal memory: 128 MB

•Brightness: 250 cd/m²

•Contrast ratio: 500:1

•Aspect ratio: 4:3

•Supported memory cards: SD, MMC, MS, MS Pro, CF, xd

•USB 2.0 high speed, USB OTG

•Supported picture format: JPG

•Full screen, thumbnail and slide show view with various change-over effects

•Picture rotation, picture zoom

•Displays calendar and clock

•Can be set up in picture or landscape format

•Built-in wall mounting

•Incl. remote control, USB cable

��