Building In
The oven must be installed according to the instructions supplied on p.
Please ensure that when the appliance is installed it is easily accessible for the engineer in the event of a breakdown.
The appliance is supplied with the right or left door opening.To change the opening direction of the door proceed as in the following instructions before installing it.
1.Unscrew the upper pin and remove the spacer
2.Remove the upper door
3.Remove the hinge cover (A). Unscrew the pins
(B) and the spacers (C) and refit them on the middle hinge of the opposite side. Snap the hinge cover (A).
4.Refit the upper door, the upper pin and the spacer on the opposite side
5.Unscrew the lower pin and remove the spacer and refit them on the opposite side
Recess dimensions |
| |
Height | (1) | 1780 mm |
Depth | (2) | 550 mm |
Width | (3) | 560 mm |
To ensure adequate ventilation, allow the clearances shown in figure.
It is necessary that the cabinet has a ventilation recess with the following dimensions:
depth | 50 mm |
width | 540 mm |
8
C |
|
B | A |
50 mm | min. |
|
200 cm2 |
| |
|
| min. |
|
| 200cm2 |
D567 |
|
|
540 | 50 |
|
|
| |
| 3 |
|
| 2 | 1 |
PR01 |
|
|
