Installation
Please ensure that when the appliance is installed it is easily accessible to an engineer in the event of a breakdown.
All installations must comply with the local authorities requirements for the discharge of exhaust air.
Incorrect installation may affect the safety of this cooker hood.
Installation Requirements
Before installation check the wall to which the cooker hood is to be fitted for electric cables, water pipes or gas.
The chimney hood must be installed accord- ing to the instructions suppliers below and by qualified and competent personnel to the relevant National Standards.
This cooker hood is designed to be fixed to any vertical surface over a cooking area,and can be used in the extrac- tion (ducted to the outside) or recirculation mode.
The installation work must be undertaken by a qualified and competent person.
The manufacturer disclaims any responsibility for dam- age due to incorrect installation of the cooker hood or if the hood is not installed in compliance with relevant regulations controlling this type of installation.
Unpacking
Before unpacking the cooker hood position the carton with the arrows pointing upwards as illustrated on the carton.
The cooker hood is made up of the following compo- nents:
Ref Qty Product Components
11 Hood body,complete with controls,lighting, fan and filters.
21 Telescopic Chimney comprising:
2.11 Upper section
2.21 Lower section
91
101
151 Air outlet connector
Ref Qty Installation Components
7.12 Hood body fixing brackets
7.2.12 Upper chimney wall fixing brackets
12c | 6 | Chimney fixing screws |
12d | 2 | Screws M4x25 |
Ref Qty Documentation
1 Instruction booklet
15
2.1
2
2.2
10
9
1
7.2.1
12c
12c
12c
7.1
12d
5
