The Control Panel
1
6 |
| 2 |
|
| |
| 5 | 3 |
| 4 | |
|
| |
➀ ➁ ➂ ➃ ➄ | ||
1Pilot light
2Thermostat control knob
3
4Push button for
5Warning light
Start your appliance
Insert the plug into the wall socket.The appliance
can be activated by turning the thermostat knob (2) beyond the «O» position.When the pilot light (1) is illuminated , this shows that the appliance is on.
Temperature control
The temperature within the freezer is controlled by the thermostat control knob (2) situated at the bottom of the cabinet .
To operate the freezer proceed as follows: Position 1 = minimum coldness
Position 6 = maximum coldness
Turn the thermostat control knob beyond the «O» position.
When you first start the freezer, we suggest that you turn the thermostat control to a medium setting. For easier turning of this control, use a small coin.The internal temperature of the freezer is automatically adjusted by the thermostat to ensure safe food storage.
However, if the appliance is working in unfavourable room conditions such as
-poor ventilation,
-high temperature,
-frequent door openings,
it may be necessary to select a more suitable setting.
Warning light (red)
If the temperature warning light (4) blinks, it indicates that the temperature within the freezer has reached a level where the safe food storage is no longer ensured.
When the freezer is first switched on, the warning light will blink until the temperature has dropped to a safe level for the storage of frozen food.
Temperature acoustic alarm
This appliance incorporates an alarm which gives off an audible signal whenever the warning light comes on.This signal can be temporarily stopped by depressing the push button for
Open door acoustic alarm
This appliance also incorporates an alarm which sounds if the door is left open for more than 60 seconds.The signal will be stopped when the door is closed again.
13
