John Lewis JLSS1814, JLFFW2013, JLFFW1811 Drinks Chill Function, Excessive temperature alarm

Models: JLFFW2012 JLSS2015 JLFFW1811 JLFFW2013 JLSS1814

1 28
Download 28 pages 41.87 Kb
Page 10
Image 10
Drinks Chill Function

The maximum quantity of foods to freeze in 24 hours is shown on the rating plate.

To freeze the amount of food indicated on the rating plate, place the food directly in touch with the cooling surface (remove the drawer or basket). In case the food is frozen inside the drawers or baskets, the maximum quantity is slightly reduced.

To freeze fresh foods, you will need to activate the Action Freeze function. Press key

(D)(several times if necessary) until Excessive temperature alarm indicator appears.

You must confirm the choice by pressing key

(E)within few seconds. You will hear the buzzer and on the display will appear some animation with lines.

After a pre-cooling period of 24 hours, place the foods in the freezer.

Place the food to be frozen in the Manual backgroundManual backgroundManual background compartment, as this is the coldest point. The freezing process takes 24 hours. During this period do not put other foods in the freezer.

This function stops automatically after 52 hours.

It is possible to deactivate the function at any

time by pressing key (D) until Manual background indicator will flash and then press key (E).

Drinks Chill Function

The Drinks Chill function is to be used as a safety warning when placing bottles in the freezer compartment. It is activated by pressing key (D) (several times if necessary) until the corresponding icon appears Manual background . You must confirm the choice by pressing key

(E)within few seconds. You will hear the buzzer and the icon remains lighted.

In this condition it operates a timer with a default value of 30 min. and it could change from 1 to 90 min., by pressing key (B) you select the minutes needed.

At the end of the selected time there are the following indications:

on the indicator Manual backgroundManual backgroundManual backgroundManual background the symbol Manual backgroundManual background flashing

the icon Manual background flashing

the icon Manual background flashing

sounding of an acoustic alarm until key (E)

is pressed

At this point bear in mind to remove the drinks contained in the freezer compartment. It is possible to deactivate the function at any time by pressing key (D) until the corresponding icon will flash and then key (E).

Excessive temperature alarm

An increase in the temperature in a compartment (for example due to an power failure) is indicated by:

flashing temperature

freezer compartment Manual background flashing

flashing of the icon Manual background

sounding of buzzer

When normal conditions are restored:

the acoustic signal shuts off

the temperature value continues to flash When you press key (E) to de-activate the alarm, the highest temperature reached in the

compartment appears on indicator Manual backgroundManual backgroundManual backgroundManual background for some seconds.

Then it returns on the normal operation showing the temperature of the selected compartment.

During the alarm phase, the buzzer can be switched off by pressing key (E).

10

Page 10
Image 10
John Lewis JLSS1814, JLFFW2013, JLFFW1811, JLSS2015, JLFFW2012 Drinks Chill Function, Excessive temperature alarm