![](/images/new-backgrounds/1183672/18367239x1.webp)
Symptom | Possible causes | |
|
|
|
The machine vibrates when | ● | The internal packing has not been removed. |
spinning | ● | The machine is in contact with the wall or furniture. |
| ● | The machine is not level and stable (check diagonally). |
| ● | The washing load is badly distributed in the drum. |
| ● | Maybe there is very little laundry in the drum. |
|
|
|
The door will not open | ● | The water level is above the bottom edge of the door. |
| ● | The machine is heating the water. |
| ● | The drum is turning. |
| In any case the door can be opened only when the door locked | |
| light has gone out. | |
|
|
|
Spinning starts late or the | ● | The electronic balance control device has cut in because the laundry is |
machine does not spin |
| not evenly distributed in the drum. The laundry is redistributed by |
|
| reverse rotation of the drum. This may happen several times before |
|
| the unbalance disappears and normal spinning can resume. If, after few |
|
| minutes, the laundry is still not evenly distributed in the drum, the |
|
| machine will not spin. In this case, redistribute the load manually and |
|
| select the spin programme. |
|
|
|
The machine makes an unusual | ● | The machine is fitted with a type of motor which makes an unusual |
noise |
| noise compared with other traditional motors. This new motor |
|
| ensures a softer start and more even distribution of the laundry in the |
|
| drum when spinning, as well as increased stability of the machine. |
|
|
|
No water is visible in the drum | ● | Machines based on modern technology operate very economically |
|
| using very little water without affecting performance. |
|
|
|
|
|
|
Service & Spare Parts
In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact our extended warranty administrators by telephoning:
0870 01 07887
They will give you details for your local Service Force Centre.
Before calling out an engineer, please ensure you have read the details under the heading “Something Not Working”.
When you contact the Service Force Centre you will need to give the following details:
1.Your name, address and post code
2.Your telephone number
3.Clear and concise details of fault
4.The model and serial number of the appliance (found on the rating plate - see picture)
5.The purchase date.
Please note that a valid purchase receipt is required for
| Mod |
| Prod. No |
P0042 BD | Ser. No |
|
20