Johnson Controls 1 user manual Package Contents, First Use, Software Installation

Package Contents

The LogMan II is supplied with the following:

•PSION Workabout Pro Second Generation Hand-Held Computer

•PSION Workabout Pro Desktop Docking Station with AC power adaptor, adaptor plugs, and USB A-B cable

•LogView software installation CD-ROM (trial version)

•Standard multi-cable for controller connection

•This “Getting Started” Guide

First Use

The LogMan II is ready to use after charging the battery. Get started as follows.

Step Action

1Connect the docking station to AC power using the provided power supply and plug adaptor.

2Insert the hand-held computer into the docking station and press it down until it locks. Allow the battery to charge for up to 6 hours. A full charge is indicated by solid green light from the charging indicator, which is located above the <ENTER> key.

It is recommended that you place the LogMan II in the docking station when not in use to keep the battery fully charged.

3To turn on the device, press and hold the <ENTER> button for a second or two. To turn off the device, press the blue <FN> key followed by the <ENTER> key.

4From the startup menu, use the up/down arrow keys to select “LogMan” and press <ENTER>.

5Using the included multi-connector cable, connect the female 9- pin D plug to the top of the hand-held computer. Locate the connector that fits the controller’s data port and plug it in.

6From the main menu, press <1> to select “Automatic Operation”. The “Connect to Controller” screen opens. Use the up and down arrow keys to select the controller type.

7Press <ENTER> to initiate log retrieval. When the transfer is completed, press <ESC> to return to the previous menu.

Software Installation

Follow the steps below to install LogView from the installation CD-ROM.

Step		Action
1	Start by saving anything you are working on and closing all
	programs.
2	Insert the installation CD-ROM into your compact disk drive.
3	On most systems the YORK InstallManager opens automatically
	and you can proceed to the next step. If the InstallManager does
	not open, then do as follows.
	• From your Start menu click My Computer, or, from your
	desktop, double-click My Computer.
	• Double-click the compact disc drive in the list of storage drives
	and folders. If the InstallManager now opens, go to the next
	step.
	• Double-click the	icon for the install file. The
	InstallManager opens.
4	Click Install LogView.
5	Follow the instructions on screen to install the software.
6	Close the InstallManager window when installation is completed.