ASSEMBLY

Fitting the trimmer guard and Auto 32 trimmer head

(GC 2125)

 

K

K

G

F

Fitting the blade guard/combination guard, grass blade and grass cutter

(GC 2125)

•Hook the blade guard/combination guard (A) onto the fitting on the shaft and secure with the bolt. CAUTION! Use the recommended blade guard. See the Technical data section.

I

B

J

C

I

 

 

A

G

D

F

E

•Fit the correct trimmer guard (A) for use with the trimmer head. Hook the guard onto the fitting on the shaft and secure it with the bolt (L).

•Fit the drive disc (B) on the output shaft.

•Turn the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing.

•Insert the locking pin (C) in the hole to lock the shaft.

•To fit the trimmer head, first separate the two halves (see diagram). Proceed as follows:

•Insert a finger into the centre hole of the cover (I) while grasping the cover with your other fingers. Using the index finger and thumb of your other hand, release the two catches (J) that engage in the cut-outs in the bottom half

(K). Pull apart the trimmer head, grasping the cover firmly.

•Place the cover (I) and the support flange (F) on the output shaft.

•Fit the nut (G). The nut must be tightened to a torque of 35-50 Nm (3.5-5 kpm). Use the socket spanner in the tool kit. Hold the shaft of the spanner as close to the blade guard as possible. To tighten the nut, turn the spanner in the opposite direction to the direction of rotation (Caution! left-hand thread).

•Fit the bottom half of the trimmer head (K) to the cover (I) by pressing them together, with the cut-outs on the bottom half aligned with the catches on the cover.

•To dismantle, follow the instructions in the reverse order.

A

B

C

•Fit the drive disc (B) on the output shaft.

•Turn the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing.

•Insert the locking pin (C) in the hole to lock the shaft.

•Place the blade (D), support cup (E) and support flange

(F) on the output shaft.

•Fit the nut (G). The nut must be tightened to a torque of 35-50 Nm (3.5-5 kpm). Use the socket spanner in the tool kit. Hold the shaft of the spanner as close to the blade guard as possible. To tighten the nut, turn the spanner in the opposite direction to the direction of rotation (Caution! left-hand thread).

WARNING! Grass blades or grass knives

!may only be used when the J-handle is

fitted. Clearing blades must never be used with the J-handle.

14 – English

Page 13 Page 15
Page 14
Image 14
Jonsered 2125 manual Fitting the trimmer guard and Auto 32 trimmer head
Page 13 Page 15

2125 specifications

The Jonsered 2125 is a powerful and versatile chainsaw that has earned a reputation among forestry professionals and enthusiasts alike. Engineered for performance and durability, this model incorporates several features and technologies that set it apart from its competitors.

At its heart, the Jonsered 2125 boasts a robust 50cc engine, designed to deliver impressive power while maintaining efficiency. The high power-to-weight ratio ensures that users can tackle demanding tasks without the strain that typically accompanies heavier models. This chainsaw strikes an excellent balance between performance and ease of use, making it suitable for both novice and experienced users.

One of the standout features of the Jonsered 2125 is its advanced ignition system, which includes an electronically controlled ignition module. This innovation enhances starting reliability, even in challenging conditions. The saw's carburetor is finely tuned for optimal fuel delivery, contributing to consistent operation and reduced emissions. Users will appreciate the environmentally friendly design, which meets stringent emission standards without compromising on performance.

The chainsaw's ergonomics play a crucial role in the overall user experience. With a well-designed handle and lightweight construction, the Jonsered 2125 reduces operator fatigue during extended use. The anti-vibration technology integrated into the design minimizes vibrations felt in the handles, allowing for safer and more comfortable operation.

Safety features are paramount in the design of the Jonsered 2125. The chainsaw is equipped with a chain brake that activates quickly in emergencies, preventing kickback incidents. Additionally, the throttle lock ensures that the chainsaw does not accidentally start, providing peace of mind to users during transport and setup.

Maintenance is made straightforward with the Jonsered 2125. The side-mounted chain tensioner allows for quick adjustments without the need for special tools. This feature is particularly valuable for users who require a reliable chainsaw ready for action at a moment’s notice.

In conclusion, the Jonsered 2125 is a highly capable chainsaw that combines power, efficiency, and user-friendly features. With its advanced technologies, ergonomic design, and strong safety characteristics, it remains a preferred choice for those who demand quality and performance in their outdoor tools. Whether conducting professional forestry work or tackling home improvement projects, the Jonsered 2125 delivers reliable results.
Top Page Image Contents