Key To Symbols | Jonsered 2149 specification

KEY TO SYMBOLS

KEY TO SYMBOLS

Symbols

CAUTION! Chain saws can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others.

Please read the instructions carefully and make sure you understand them before using the saw.

Always wear:

• Approved protective helmet

• Approved hearing protection

• Protective glasses or visor

Both of the operator´s hands must be used to operate the chain saw. Please see page 30 in your "Chain saw operator´s safety manual".

Never operate a chain saw holding it with one hand only. Please see page 30 in your "Chain saw operator´s safety manual".

Contact of the guide bar tip with any object should be avoided. Please see pages 12-21 in your "Chain saw operator´s safety manual".

Tip contact may cause the guide bar to move suddenly upward and backward, which may cause serious injury. Please see pages 12-21 in your "Chain saw operator´s safety manual".

This product is fitted with a catalytic converter

Switch off the engine by moving the stop switch to the STOP position before carrying out any checks or maintenance.

Always wear approved protective gloves.

Regular cleaning is required.

Visual check.

Protective glasses or a visor must be worn.

Refuelling

Chain oil and chain oil flow adjustment

If your saw bears this decal it is equipped with carburettor heating.

2 – English

Image 2

Jonsered 2149 manual Key To Symbols

Contents

Operator´s manual KEY TO SYMBOLS Symbols Before using a new saw CONTENTSContents Safety instructions PERSONAL PROTECTIVE EQUIPMENT SAFETY INSTRUCTIONSCHAIN SAW SAFETY EQUIPMENT 1 Chain brake and front hand guard 4 Right hand guard 2 Throttle lock3 Chain catcher 7 Muffler 6 Stop switch5 Vibration damping system 3 Checking the inertia brake release 1Checking brake band wear2 Checking the front hand guard 4Checking the brake trigger 2 Throttle lock CUTTING EQUIPMENT The 5 basic rules B Saw chain 1Cutting equipment designed to minimise kickbackA Bar C Some terms that describe the bar and chain AGeneral information on sharpening cutting teeth B Sharpening cutting teeth 3 Tensioning the chain C General advice on setting raker clearanceDSetting the raker clearance BFilling with chain oil 4 Lubricating cutting equipmentA Chain oil FChecking wear on cutting equipment E Needle bearing maintenanceC Checking chain lubrication D Lubricating the bar tip sprocket H Bar HOW TO AVOID KICKBACKWhat is kickback? Never use the saw one- handed General rulesDo not let go of the handles ”Maintenance” GENERAL SAFETY PRECAUTIONS”Technical data” section Min. 3 m 1 Basic safety rules GENERAL WORKING INSTRUCTIONS Terms 2 Basic cutting techniqueGeneral Cutting Limbing 3 Tree felling techniqueA Safe distance B Felling direction DIRECTIONAL CUT C Clearing the trunk and preparing your retreatD Felling FELLING CUT AFreeing a “Trapped tree” E LimbingF Cutting the trunk into logs WHAT IS WHAT? What is what? ASSEMBLY Mounting guide bar and chain Gasoline FUEL HANDLINGFuelmix Two-strokeoil Min 3 m FuellingChain oil 10ft Start START AND STOPStart and stop Stop Basic setting and running in MAINTENANCEFunctioning, Basic setting, Final setting Fine adjustment Changing a broken or worn starter cord Starter device assemblyStarter device Tensioning the recoil spring Muffler Needle bearing maintenanceAir filter Spark plug Heated handles 2149W Adjustment of the oil pumpCentrifugal cleaning ”Turbo” Cooling system Monthly maintenance Weekly maintenanceDaily maintenance 34´*xnG¶5g¨ TECHNICAL DATAWeight 2149 OWNER’S WARRANTY RESPONSIBILITIES EMISSION CONTROL WARRANTY STATEMENTMANUFACTURER’S WARRANTY COVERAGE WARRANTY COMMENCEMENT DATE 2000W51 ´*xnG¶5g¨108