FEDERAL EMISSION CONTROL WARRANTY STATEMENT

YOUR WARRANTY RIGHTS AND OBLIGATIONS

The EPA (The US Environmental Protection Agency), Environment Canada and Jonsered are pleased to explain the emissions control system warranty on your 2001 and later small nonroad engine. In U.S. and Canada, new small nonroad engines must be designed, built and equipped to meet the federal stringent anti-smog standards. Jonsered must warrant the emission control system on your small nonroad engine for the period of time listed below provided there has been no abuse, neglect or improper maintenance of your unit.Your emmission control system includes Parts such as the carburetor and the ignition system. Where a warrantable condition exists, Jonsered will repair your small nonroad engine at no cost to you. Expenses covered under warranty include diagnosis, parts and labor.

MANUFACTURERS WARRANTY

COVERAGE

The 2001 and later small nonroad engines are warranted for two years. If any emission related part on you engine (as listed above) is defective, the part will be repaired or replaced by Jonsered.

OWNERS WARRANTY RESPONSIBILITIES

As the small nonroad engine owner, you are responsible for the performance of the required maintenance listed in your Operators Manual. Jonsered recommends that you retain all receipts covering maintenance on your small nonroad engine, but Jonsered cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled maintenance. As the small nonroad engine owner, you should, however, be aware that Jonsered may deny you warranty coverage if your small nonroad engine or a part of it has failed due to abuse, neglect, improper maintenance, unapproved modifications or the use of parts not made or approved by the original equipment manufacturer. You are responsible for presenting your small nonroad engine to a Jonsered authorized servicing dealer as soon as a problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days. If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized servicing dealer or call Jonsered, at Sweden +46-36-146500.

WARRANTY COMMENCEMENT DATE

The warranty period begins on the date small nonroad engine is delivered.

LENGTH OF COVERAGE

Jonsered warrants to the initial owner and each subsequent purchaser that the engine is free from defects in materials and workmanship which cause the failure of a warranted part for a period of two years.

WHAT IS COVERED

REPAIR OR REPLACEMENT OF PARTS Repair or replacement of any warranted part will be performed at no charge to the owner at an approved Jonsered servicing dealer. If you have any questions regarding your warranty

rights and responsibilities, you should contact your nearest authorized servicing dealer or call Jonsered, at Sweden +46- 36-146500.

WARRANTY PERIOD Any warranted part which is not scheduled for replacement as required maintenance, or which is scheduled only for regular inspection to the effect of “repair or replace as necessary” shall be warranted for 2 years. Any warranted part which is scheduled for replacement as required maintenance shall be warranted for the period of time up to the first scheduled replacement point for that part.

DIAGNOSIS The owner shall not be charged for diagnostic labor which leads to the determination that a warranted part is defective, if the diagnostic work is performed at an approved Jonsered servicing dealer.

CONSEQUENTIAL DAMAGES Jonsered may be liable for damages to other engine components caused by the failure of a warranted part still under warranty.

WHAT IS NOT COVERED

All failures caused by abuse, neglect or improper maintenance are not covered.

ADD -ON OR MODIFIED PARTS

The use of add-on or modified parts can be grounds for disallowing a warranty claim. Jonsered is not liable to cover failures of warranted parts caused by the use of add-on or modified parts.

HOW TO FILE A CLAIM

If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized servicing dealer or call Jonsered, at Sweden +46-36-146500.

WHERE TO GET WARRANTY SERVICE

Warranty services or repairs shall be provided at all Jonsered authorized servicing dealers.

MAINTENANCE, REPLACEMENT AND REPAIR OF EMISSION-RELATED PARTS

Any Jonsered approved replacement part used in the performance of any warranty maintenance or repairs on emission-related parts, will be provided without charge to the owner if the part is under warranty.

EMISSION CONTROL WARRANTY PARTS LIST

1Carburetor and internal parts

2Intake pipe, airfilter holder and carburetor bolts.

3Airfilter and fuelfilter covered up to maintenance schedule.

4Ignition System

1 Spark Plug, covered up to maintenance schedule

2 Ignition Module

MAINTENANCE STATEMENT

The owner is responsible for the performance of all required maintenance, as defined in the operator’s manual.

´®z*x{o¶5~¨ 38 – English´®z*x{o¶5~¨

Page 38
Image 38
Jonsered 70C, 50C manual Federal Emission Control Warranty Statement, Your Warranty Rights and Obligations

50C, 70C specifications

The Jonsered 70C and 50C chainsaws represent a pinnacle of craftsmanship and engineering excellence in the world of power tools. Designed for both professional and avid DIY enthusiasts, these models offer a blend of power, performance, and user-friendly features that elevate the cutting experience.

At the heart of both the Jonsered 70C and 50C is their powerful engine output. The 70C boasts a robust 70cc engine, delivering high torque and efficiency for demanding tasks, while the 50C is equipped with a nimble 50cc engine, perfect for lighter, more agile cutting projects. This versatility makes the chainsaws suitable for a wide range of activities, from felling trees to limbing and pruning, ensuring that they cater to varying user requirements.

One notable feature of the Jonsered 70C and 50C is their advanced air filtration systems. These systems are designed to enhance the longevity of the chainsaw's engine by preventing dust and debris from entering the combustion area. This means less maintenance and more time spent operating the chainsaw, making it an ideal choice for both professional lumberjacks and casual users.

Ergonomically designed, the handle of both models offers excellent grip and comfort, reducing user fatigue during extended use. The lightweight construction of the saws enables effortless maneuverability and control, allowing users to execute precise cuts without strain. Additionally, the quick and easy chain tensioning system facilitates fast adjustments, ensuring that the chain remains in optimal condition for continuous cutting.

Safety features are paramount in the design of the Jonsered 70C and 50C. Each model incorporates a chain brake and throttle lock to enhance user safety while operating, minimizing risks associated with kickback and accidental starts. The designs also emphasize low vibration, which further protects the user's hands and arms from fatigue, promoting a safer and more enjoyable cutting experience.

With their blend of power, efficiency, and advanced technology, the Jonsered 70C and 50C chainsaws are exceptional tools for anyone seeking reliability and performance in the field. Whether for professional logging or home landscaping, these chainsaws embody the quality and innovation expected from the Jonsered brand.