Jonsered BB2250 manual Storage, Air Inlet Net, Sholder Strap, Maintenance

Models: BB2250

1 17
Download 17 pages 29.81 Kb
Page 17
Image 17
■AIR INLET NET

Maintenance

AIR INLET NET

■SHOLDER STRAP IMPORTANT

Blown air is taken in from the air inlet net. If the air flow drops during opera- tion, stop the engine and inspect the air inlet net for blockage by obstacles.

Note that failure to remove any such obstacles may result in the engine becoming overheated and damaged.

(1) Net

StorageWARNING

Never use the blower without the net on the blower. Before each use, check that the net is attached in place and is free from any damage.

SHOLDER STRAP

If the shoulder strap is damaged it may break during use, thus causing the product to fall and resulting in personal injury. Follow the instructions below to replace the shoulder strap with new one.

Pass the upper end of the strap through the hanger, making the FLAPPED SIDE OUTSIDE.

Put the end of the strap through the ring on the strap, and then push the ring toward the hanger as close as possible.

(1) Ring

English

F20

(1)

F21

Storage

BEFORE STORING THE BLOWER:

1.Drain the fuel tank and push the primer bulb until it becomes empty of fuel.

2.Remove the spark plug and drop a spoonful of 2-cycle oil into the cylider. Crank the engine several time and install the spark plug.

3.Store unit in a dry, cool and dark, well-ventilated, dust-free place, out of the reach of children.

17

Page 17
Image 17
Jonsered BB2250 manual Storage, Air Inlet Net, Sholder Strap, Maintenance