SYMBOLS USED IN OPERATOR’S MANUAL:
ENGLISH
Always disconnect power before performing cleaning or maintenance work.
Always use approved safety gloves.
Clean your chain saw regularly.
Use approved face mask or safety goggles.
Visual inspection. |
|
Do not use a coiled extension cord. |
|
Minimum wire | 1,5 mm² |
Maximum cable length: | 30 m |
Voltage: | 230 V |
CAUTION!
Chain saws are dangerous! Careless or improper use can result in severe or fatal injury.
SYMBOLS ON THE CHAIN SAW:
CAUTION!
Chain saws are dangerous! Careless or im- proper use can result in serious or fatal injury.
Read operating instructions and make certain you understand them thoroughly before using the chain saw.
The chain saw is
Always use:
•Approved helmet
•Approved hearing protection
•Approved safety goggles or face mask
This product conforms to applicable CE directives.
Noise emission to the environment according to the European Community’s Directive. The machine’s emission is specified in «TECHNICAL SPECIFICATIONS» page 3 and on label.
Do not expose saw to rain or moisture.
Disconnect power in case of damage to power cable.
Maximum permissible guide bar length.
This product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council office, your household waste disposal service or the shop where you purchased the product.
IMPORTANT! BEFORE USING CHAIN SAW
•Read operating instructions carefully.
•Always observe the «Safe Use» recommendations on page 4.
•Check chain and guide bar for correct assembly and adjustment.
•Start the saw.
•Do not start sawing until an adequate amount of oil has reached the chain.
•Incorrect chain tensioning increases wear on chain, sprocket and guide bar, and may result in damage to these parts.
•Improper use of power cable may lead to serious motor damage.
IMPORTANT!
Do not use a coiled power cable!
Minimum wire | 1,5 mm² | |
Maximum cable length: | 30 | m |
Voltage: | 230 | V |
CAUTION!
The chain saw must not be modified in any way under any circumstances without the permission of the manufacturer. Use only original accessories. Unauthorized modifications and/or accessories may cause serious or fatal injury of the operator or others.
2
